
The AirTAC GC400-15 FRL Unit (GC40015AF3WTK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC40015AF3WTK is an AirTAC GC-series three-unit F.R.L. combination: separate filter, regulator and lubricator piped as one set, with a reverse (check) valve fitted in the regulator section. This 400-size unit carries a NPT1/2 port, automatic drain on the filter bowl, 5 um filtration and a square gauge scaled in bar. It removes water and particulate, holds your set downstream pressure and meters oil mist into the line.
This is a genuine AirTAC part for compressed air, rated to 1.0 MPa (145 psi) maximum working pressure and -5 to 70 C (non-freezing). The 400 size uses polycarbonate bowls, and with automatic drain the regulator adjusts from 0.15 to 0.9 MPa. Flow figures for this series are published as curves, not a single rating, so we confirm sizing and datasheet details on request. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | AirTAC GC400-15 FRL Unit (GC40015AF3WTK) |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-15 filter, GR400-15 regulator and GL400-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT1/2" · 5 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-15 |
| Build order | Filter → regulator → lubricator |
Conditions the air feeding the cylinder and gripper valves on an end-of-line carton sealer, with the check valve holding the circuit against backflow and the auto drain emptying the bowl unattended.
Feeds filtered, regulated, lubricated air to the tool-change cylinder and clamp actuators on a machining center, where pressure setpoint stability and a check valve support repeatable tool exchange.
Supplies the pneumatic cylinders that raise and lower high-speed fabric dock doors at a distribution warehouse, with the 5 um element and automatic drain suiting a dusty, lightly attended area.
Size against real demand: the GC range runs 200, 300, 400 and 600, and this 400-size, NPT1/2-port set sits in the middle-to-upper band. The K suffix adds a reverse (check) valve, worth specifying when backflow through the regulator section must be prevented. Drain is automatic here; manual and differential-pressure are the other decodable choices. Filtration is the 5 um W grade; 40 um is the standard alternative. Gauge is square with a bar scale; This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Because rated flow appears only as curves, ask us to check your air demand against the datasheet before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-15 regulator with a GF400-15 filter on that branch.
There is no single rated flow number for this unit; AirTAC publishes the GC series flow data as curves. Share your machine's demand and line pressure and we will confirm sizing and the full datasheet on request before you order.
The K suffix specifies that a reverse (check) valve is fitted in the regulator section of this otherwise standard three-unit F.R.L. set. Everything else decodes identically: 400 size, NPT1/2 port, automatic drain, 5 um filtration and a square bar-scaled gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.