
The AirTAC GC400-15 FRL Unit (GC40015C1TK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC40015C1TK is a genuine AirTAC G-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator supplied as one set. It is size 400 with a 1/2 in. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The regulator adjusts from 0.15 to 0.9 MPa (20-130 psi) with this drain type, and maximum inlet pressure is 1.0 MPa (145 psi).
This is a genuine AirTAC part from the G-series range, which spans sizes 200, 300, 400 and 600 with three thread types (NPT on this code). On this size 400 unit the filter bowl is polycarbonate, and the working temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rating, so we confirm datasheet and sizing figures for your application on request.
| Model | AirTAC GC400-15 FRL Unit (GC40015C1TK) |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-15 filter, GR400-15 regulator and GL400-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT1/2" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-15 |
| Build order | Filter → regulator → lubricator |
Conditioning air for fixture clamps on a welding line, where the check valve helps maintain clamp force if the shop main loses pressure mid-cycle and the MPa gauge shows the set clamp pressure.
Filtering, regulating and lubricating air to the on-off actuators of a process skid, with the check valve preventing backflow surprises during upstream isolation and the gauge supporting documented setpoints.
Feeding a maintenance-shop bench outlet that runs impact tools and test rigs, giving filtered, regulated, lubricated air with a visible MPa reading and pressure retained in the downstream hose when the main is shut.
Pick this K version over the plain GC40015C1 when your circuit benefits from a check valve holding downstream pressure - for example on clamping or holding circuits fed from a shared main. Size 400 with the 1/2 in. NPT port sits between the 3/8 in. size 300 and the 3/4 in. size 600 steps. The 40 um standard element suits general machine air; the W variant gives 5 um fine filtration.
The differential-pressure drain is the maintenance-free default, with automatic (A) and manual (M) drain variants available in the series, and the C1 round gauge reads in MPa (psi and bar scale gauges are also offered). This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating, so ask us to confirm sizing from the datasheet before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-15 regulator with a GF400-15 filter on that branch.
AirTAC publishes flow for the G series as performance curves rather than a single rated figure, so we do not quote a number here. Share your working pressure and air demand and we will confirm the sizing from the datasheet on request before you order.
K adds a reverse (check) valve to the combination, which helps hold downstream pressure against upstream drops; the standard version has no check valve. Everything else decodes the same: size 400, 1/2 in. NPT port, 40 um element, differential-pressure drain and an MPa round gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.