
The AirTAC GC400-15 FRL Unit (GC40015F1T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC40015F1T is an AirTAC G-series three-unit F.R.L. combination: separate filter, regulator and lubricator assembled as one set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. In use the set strips water and particulate from the supply, regulates downstream pressure and delivers oil mist to cylinders, valves and air tools.
This is a genuine AirTAC part. The G-series F.R.L. Maximum working (inlet) pressure is 1.0 MPa (145 psi); working temperature is -5 to 70 C, non-freezing. The size 400 bowls are polycarbonate (PC). Flow is published as curves rather than a single rated figure, so we confirm flow and datasheet figures on request.
| Model | AirTAC GC400-15 FRL Unit (GC40015F1T) |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-15 filter, GR400-15 regulator and GL400-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT1/2" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-15 |
| Build order | Filter → regulator → lubricator |
Regulates and lubricates the air feeding clamp cylinders on a CNC machining fixture, holding consistent clamp pressure across every cycle.
Supplies the diverters and pusher cylinders on a bottling conveyor, where filtered, oil-misted air keeps fast-cycling valves moving reliably.
Fitted at workshop air points so pneumatic hand tools, presses and test rigs receive clean, regulated air with continuous mist lubrication.
At size 400 and 1/2 in NPT ports this is the upper-mid flow step of the G-series; move to 300 or 600 if your consumption sits elsewhere - we can check the flow curve against your demand first. The differential-pressure drain works on its own as condensate builds; automatic (A) or manual (M) drains are orderable. Filtration is the standard 40 um grade, with the 5 um (W) element available for cleaner applications. The square gauge here reads in MPa; alternative scales (psi, bar) and gauge styles are catalogue choices. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-15 regulator with a GF400-15 filter on that branch.
AirTAC publishes G-series flow as curves rather than a single rated figure, so there is no single number to quote. Tell us the flow your application needs and the working pressure, and we will confirm the sizing and datasheet figures for this size 400, 1/2 in NPT set on request.
F is the square embedded gauge and 1 is the MPa scale. If you prefer psi or bar readings, or the external round gauge style, those are catalogue options on the same set - for example C1 would be the round gauge in MPa. The regulation range itself is unchanged at 0.15-0.9 MPa (20-130 psi) with the differential-pressure drain.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.