
The AirTAC GC400-15 FRL Unit (GC40015F1TK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC40015F1TK is an AirTAC G-series three-unit F.R.L. combination: separate filter, regulator and lubricator working as one set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The trailing K is the decode you can see in the code: a reverse (check) valve is fitted, as the catalogue option for this family. The set filters, regulates and lubricates downstream air in the normal way.
This is a genuine AirTAC part. The G-series F.R.L. Maximum working (inlet) pressure is 1.0 MPa (145 psi); working temperature is -5 to 70 C, non-freezing. The size 400 bowls are polycarbonate (PC). Flow is published as curves rather than a single rated figure, so we confirm flow and datasheet figures on request.
| Model | AirTAC GC400-15 FRL Unit (GC40015F1TK) |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-15 filter, GR400-15 regulator and GL400-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT1/2" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-15 |
| Build order | Filter → regulator → lubricator |
Filters, regulates and lubricates the air feeding clamp and ejector cylinders on a mechanical press, with the check-valve option built into the set as specified.
Serves depot air points where trailer-door actuators and pneumatic hand tools run all shift on clean, regulated, oil-misted air.
Supplies non-product-contact secondary air circuits on packaging machinery, keeping the standard 40 um grade, stable pressure and mist lubrication at each drop.
Choose this K-coded set when your specification calls for the reverse (check) valve option; without the K the identical set is GC40015F1. Beyond that, the choices are the usual ones for the family: size 400 with 1/2 in NPT ports is the upper-mid flow step, the differential-pressure drain works unattended (automatic A or manual M are orderable), filtration is the standard 40 um grade with a 5 um (W) element available, and the square gauge reads in MPa with psi and bar scales as catalogue options. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G(BSPP) and NPT versions are orderable, as is a mounting bracket. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-15 regulator with a GF400-15 filter on that branch.
AirTAC publishes G-series flow as curves rather than a single rated figure, so we do not state one. Give us your required flow and working pressure and we will confirm the sizing and datasheet figures for this size 400, 1/2 in NPT set with the check-valve option on request.
The K means a reverse (check) valve is fitted, which is a catalogue option on the G-series regulator family. Everything else decodes the same: size 400, 1/2 in NPT ports, differential-pressure drain, 40 um filtration and an MPa square gauge, with a 0.15-0.9 MPa (20-130 psi) regulation range.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.