
The AirTAC GC400-15 FRL Unit (GC40015LC1T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC40015LC1T is a three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one set. It filters water and particulate to 40 um, regulates downstream pressure with its low-pressure (L) type regulator, adds oil-mist lubrication for air tools and cylinders, and drains condensate via the differential-pressure bowl. The 400 size carries a NPT1/2 port, and the MPa round gauge is included for pressure setting.
This is a genuine AirTAC part, offered in the 200/300/400/600 size range with port options from 1/8" to 1", G(BSPP) or NPT thread variants, automatic, manual or differential-pressure drains and a 5 um filter option. Because flow is published as curves rather than a single rating, we confirm the datasheet and flow figures for your application on request.
| Model | AirTAC GC400-15 FRL Unit (GC40015LC1T) |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-15 filter, GR400-15 regulator and GL400-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT1/2" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-15 |
| Build order | Filter → regulator → lubricator |
Supplies filtered, regulated and lubricated air to the clamp and lift cylinders that hold trim panels on a moving assembly line, with the low-pressure type regulator suited to modest working pressures.
Feeds the air cylinders that open chip doors and actuate tool clamps, keeping moisture and grit out of the valves while oil mist keeps cylinder seals running smoothly.
Prepares the air feeding pusher plates and gripper cylinders on a palletising conveyor, so packed cases are indexed and stacked without valve contamination sticking the sequence.
Step up or down in size (200/300/400/600) to match the port and air demand of the machine; the 400 size with a 1/2" port suits larger general-purpose circuits. Drain choices are differential-pressure (default), automatic or manual - the differential drain here discharges as pressure drops. Filter grade is 40 um as standard; the W suffix gives 5 um. The MPa round gauge is fitted; square-gauge variants and psi/bar scales are catalogue options. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Flow for this series is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-15 regulator with a GF400-15 filter on that branch.
AirTAC publishes flow for the GC series as characteristic curves rather than a single rated figure, so there is no one l/min or SCFM number we can quote honestly. Send us your application details and we will confirm the flow and datasheet figures for this 400-size, 1/2"-port set on request.
The blank drain position decodes to the differential-pressure drain, the series default: condensate discharges from the bowl when the pressure differential across it builds. If you want continuous unattended draining, the A suffix gives an automatic drain and M gives a manual drain - both are catalogue options for the filter unit of this set.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.