
The AirTAC GC400-15 FRL Unit (GC40015LF1WT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC40015LF1WT is a three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one set. The W suffix specifies the finer 5 um filter element, the low-pressure (L) type regulator sets downstream pressure, the lubricator meters oil mist, and the differential-pressure drain removes condensate. The 400 size carries a NPT1/2 port and the MPa square gauge is fitted.
This is a genuine AirTAC part, offered across the 200/300/400/600 sizes with ports from 1/8" to 1", G(BSPP) and NPT thread variants, automatic or manual drain options and the 40 um standard element. Because flow is published as curves rather than a single rating, we confirm the datasheet and flow figures for your application on request.
| Model | AirTAC GC400-15 FRL Unit (GC40015LF1WT) |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-15 filter, GR400-15 regulator and GL400-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT1/2" · 5 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-15 |
| Build order | Filter → regulator → lubricator |
Feeds the pneumatic cylinders and jets of a weaving or spinning line, where 5 um filtration protects the fine orifices and solenoid valves from lint-laden, wet plant air.
Supplies clean, regulated and lubricated air to the register and impression pneumatics of a press, keeping the densely plumbed valve stack free of moisture and fine debris.
Prepares the air for interlocked gate and guard cylinders on a packaging machine, with the regulator holding the set pressure and 5 um filtration protecting the safety circuit valves.
Take the 400 size with its 1/2" NPT port when your circuit's air demand calls for it; the 200/300/600 sizes step the port between 1/8" and 1". This build pairs the 5 um element (W suffix) with the differential-pressure drain - the 40 um element and automatic or manual drains are the alternative catalogue choices. The F code fits the embedded square gauge in MPa; round-gauge and psi/bar-scale variants are orderable, as are G(BSPP) and NPT threads and bracket arrangements.
Flow for this series is published only as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-15 regulator with a GF400-15 filter on that branch.
There is no single rated flow figure to give: AirTAC publishes GC-series performance as characteristic curves, so quoting one number would be guesswork. Send us your application parameters and we will confirm the flow curve and datasheet figures for this 400-size, 1/2"-port set on request.
A GFR filter-regulator only filters and regulates; this GC combination adds a separate lubricator as a third unit, so downstream air tools and cylinders also receive oil mist - all three functions on one 1/2" NPT connection. If your equipment is self-lubricating or must stay oil-free, a GFR or GF-only build is the better decode, and we can confirm the right option from the range.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.