
The AirTAC GC400-15 FRL Unit (GC40015MC1T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC40015MC1T is a three-piece AirTAC G-series F.R.L. combination - separate air filter, pressure regulator and lubricator - in size 400 with NPT1/2 ports and a NPT thread. The M selects a manual drain on the polycarbonate (PC) filter bowl, so collected water is released by operating the drain by hand. The standard regulator type covers the usual 0.05-0.9 MPa (7-130 psi) adjusting range for manual-drain units, and the C1 option adds an external round gauge with an MPa scale for a clear setpoint readout. The filter element is the standard 40 um grade.
This is a genuine AirTAC part. The G-series runs from size 200 to 600, with differential-pressure or automatic drain options, a 5 um filter element, embedded square or external round gauges, and G (BSPP) or NPT threads as catalogue choices. Maximum working pressure is 1.0 MPa (145 psi); operating temperature is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so we confirm figures from the datasheet on request.
| Model | AirTAC GC400-15 FRL Unit (GC40015MC1T) |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-15 filter, GR400-15 regulator and GL400-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT1/2" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-15 |
| Build order | Filter → regulator → lubricator |
Conditions the air feeding clutch, counterbalance and part-ejection circuits on a stamping press, with the MPa round gauge letting the setter read the regulated pressure at a glance.
Filters, regulates and lubricates the air at assembly-station outlets driving impact wrenches and pneumatic ratchets on truck and trailer assembly lines, with manual blow-down of collected water between shifts.
Prepares the air feeding spray guns in a paint booth: the 40 um element removes water and particles, the regulator sets gun pressure read on the round gauge, and the lubricator is bypassed or set per gun requirements.
Choose the manual drain (M) when an operator is already at the machine and a scheduled blow-down fits the routine; pick the automatic drain version if the unit sits in an inaccessible spot. With manual drain, the regulator's adjusting range is 0.05-0.9 MPa (7-130 psi). The C1 code fits an external round gauge reading in MPa; square embedded gauges and other scale options exist in the series. Size 400 with NPT1/2 ports suits a 1/2 inch main feeding multiple actuators; step down to GC200 or GC300 for lighter duty. Filter grade is 40 um standard, 5 um with W. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Flow for G-series units is published as curves, not a single rated figure, so send us your flow demand and we will confirm sizing against the AirTAC datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-15 regulator with a GF400-15 filter on that branch.
We do not quote a rated flow number because AirTAC publishes G-series flow as performance curves rather than a single rating. Give us your air demand and line pressure and we will confirm the sizing from the datasheet on request before you order.
M selects the manual drain, so water in the filter bowl is drained by hand - this version's regulator adjusts over 0.05-0.9 MPa (7-130 psi). C1 fits an external round gauge with an MPa scale. If you prefer automatic drainage or a different scale, those are catalogue options in the same series.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.