verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC400 · F.R.L. Combination (filter + regulator + lubricator)

AirTAC GC400-15 FRL Unit (GC40015MF1TK)

The AirTAC GC400-15 FRL Unit (GC40015MF1TK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT1/2"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade40 µm
  • DrainManual drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$170.15 $177.65Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC400-15 drain, gauge and thread option on one page All GC400-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GC400-15 FRL Unit (GC40015MF1TK)

The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator piped as one air-preparation set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Use it where a standard set would work but backflow through the set needs blocking.

This is a genuine AirTAC part rated to 1.0 MPa (145 psi) inlet, with a manual-drain regulation range of 0.05-0.9 MPa (7-130 psi) and a working temperature of -5 to 70 C, non-freezing. The G series spans 200, 300, 400 and 600 sizes with drain, filter-grade, gauge, thread and reverse-valve options. Flow is published as curves, not a single figure, so ask us to confirm the datasheet and sizing for your application on request. Order code GC40015MF1TK has NPT ports (the T in the code) for North American pipe fittings.

AirTAC GC400-15 FRL Unit (GC40015MF1TK) Technical Specifications

ModelAirTAC GC400-15 FRL Unit (GC40015MF1TK)
SeriesGC400 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT1/2" (NPT thread)
Filtering grade40 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialPC
Pressure gaugeFitted — square, MPa scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GC400-15 FRL Unit (GC40015MF1TK)

GC400G-series F.R.L. combination, 400 body — sets the port range.
15Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
1Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-15 filter, GR400-15 regulator and GL400-15 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC400 · PT1/2" · 40 µm
One size downGC300
One size upGC600
Two-unit equivalentGFC400-15
Build orderFilter → regulator → lubricator

Where the AirTAC GC400-15 FRL Unit (GC40015MF1TK) Is Used

factory

Automotive assembly clamps

Conditions the air feeding power-clamp cylinders on an assembly line, with the reverse valve in the circuit where the downstream side must not backfeed the supply.

local_shipping

Service van air tools

Prepares the shop-air drop that fills a mobile service van setup, delivering regulated, oil-misted air to impact wrenches and air ratchets used on the road.

tune

Printing press cylinders

Filters, regulates and lubricates the air for impression and delivery cylinders on a printing press, where consistent set pressure keeps registration steady.

Is the AirTAC GC400-15 FRL Unit (GC40015MF1TK) the Right Station?

This code is the MF1 set plus the K suffix, which fits a reverse (check) valve; order GC40015MF1 without the K if you do not need it. The 400 size with 1/2 in NPT ports typically feeds a machine or station from one drop - validate against the flow curve before ordering. Manual drain suits attended installations; the A (automatic) and blank (differential-pressure) drain versions suit unattended ones. The 40 um element is standard, with 5 um (W) available; the square gauge reads in MPa, and psi or bar scales plus G (BSPP) and NPT threads are orderable.

Because flow is published as curves rather than a single rating, send us your duty point and we will confirm sizing from the datasheet on request.

Quick checklist

  • ✓ Body size for your peak flow (PT1/2" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-15 regulator with a GF400-15 filter on that branch.

AirTAC GC400-15 FRL Unit (GC40015MF1TK) FAQ

Yes. AirTAC publishes flow for the GC series as performance curves, not a single rated figure, so we do not quote a number here. Send us your operating pressure, downstream consumption and this code, and we will confirm the sizing from the datasheet on request.

K is the reverse-valve option: a reverse (check) valve is fitted to this set, so the same GC40015 series code without K - for example GC40015MF1 - is the version without it. Choose the K version when the application needs backflow blocked through the set; we can confirm the datasheet details on request.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GC400-15 FRL Unit (GC40015MF1TK)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GC40015MF1TK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.