verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GF200 · Air Filter (water separation + particulate filtration)

AirTAC GF200-08 Filter (GF20008MJT)

The AirTAC GF200-08 Filter (GF20008MJT) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with PT1/4" ports and a manual drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.

  • TypeAir filter
  • Port sizePT1/4"
  • Filtering grade40 µm
  • DrainManual drain
  • Inlet pressure0 - 0.9 MPa (0 - 131 psi)
  • Bowl materialPC
  • ThreadNPT
  • BracketSupplied without bracket
$20.93 $28.43Save 26% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GF200 stroke, mounting and version on one page All GF200 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GF200-08 Filter (GF20008MJT)

GF20008MJT is an AirTAC G-series air filter in size 200 with a 1/4 in NPT port. It removes water and particulate from compressed air only - there is no pressure regulation and no lubrication. This configuration carries a manual drain, so condensate collected in the bowl is released by hand, and the standard 40 um filter element. The size 200 bowl is polycarbonate (PC), and code J means no mounting bracket is supplied. Maximum inlet pressure with the manual drain is 0.9 MPa; working temperature is -5 to 70 C, non-freezing.

This is a genuine AirTAC part. The G-series filter family runs from size 200 to 600, with larger ports and greater flow capacity at each step, and is available with differential-pressure (default), automatic or manual drains, a 5 um element (code W), G (BSPP) or NPT threads as catalogue options, and with or without a bracket. Flow and datasheet figures are confirmed on request.

AirTAC GF200-08 Filter (GF20008MJT) Technical Specifications

ModelAirTAC GF200-08 Filter (GF20008MJT)
SeriesGF200 air filter
Port sizePT1/4" (NPT thread)
Filtering grade40 µm
Drain typeManual drain
BracketSupplied without bracket
FluidCompressed air
Inlet pressure0 - 0.9 MPa (0 - 131 psi)
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Bowl materialPC
FeatureLow pressure loss

Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GF200-08 Filter (GF20008MJT)

GF200G-series air filter, 200 body — sets the port range.
08Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4".
MDrain: Manual drain. Options are differential (blank), automatic (A) or manual (M).
JSupplied without bracket. A bracket ships by default; J orders it without.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.

Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.

Size Class

  • GF200PT1/8" - PT1/4"
  • GF300PT1/4" - PT1/2"
  • GF400PT3/8" - PT1/2"
  • GF600PT3/4" - PT1"

A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.

This modelGF200 · PT1/4" · 40 µm
One size upGF300
Line orderFilter first, then regulator, then lubricator

Where the AirTAC GF200-08 Filter (GF20008MJT) Is Used

settings_input_component

CNC tool-changer air drop

Install at the point of use on a machining center's tool-changer and clamp circuit to strip water and chips-laden particulate before the directional valves; the manual drain is opened at shift start.

conveyor_belt

Packaging line actuator supply

Fit upstream of the cylinders and grippers on a carton-forming packaging line so condensate and pipe scale are kept out of the 1/4 in valve manifold feeding the motion axes.

factory

Assembly-station air drops

Mount as the first element on a bench drop in an assembly cell, protecting air guns, clamps and small actuators from rust and water carried in the plant ring main.

Is the AirTAC GF200-08 Filter (GF20008MJT) the Right Filter?

Use the size digits (200/300/400/600) to step port size and flow path up or down; this size 200 unit carries a 1/4 in NPT port. Choose the drain type: manual (this model - condensate is hand-released, inlet 0-0.9 MPa), automatic for unattended draining, or the default differential-pressure type. Element grade is 40 um standard; add W for the 5 um element where finer filtration is needed. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue thread options to order. Code J omits the mounting bracket. Flow is published as curves, not a single rated figure - ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1/4" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain: differential, automatic or manual
  • ✓ Manual drain caps inlet at 0.9 MPa
  • ✓ Thread PT, G (BSPP) or NPT
  • ✓ Bracket needed, or order with J
Ask an Engineer

Installation & Maintenance Notes

  • check Mount vertically, bowl down, and follow the airflow arrow.
  • check Put the filter first in the air-preparation line.
  • check Keep inlet pressure within 0 - 0.9 MPa (0 - 131 psi).
  • check Drain condensate before the bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Replace the 40 µm element when pressure loss rises.

The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.

AirTAC GF200-08 Filter (GF20008MJT) FAQ

AirTAC publishes flow for the G-series filters as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow data from the datasheet on request before you order.

A manual drain means you release condensate by hand, which suits points of use that are checked regularly; the inlet limit for this version is 0.9 MPa. If the unit runs unattended, choose the automatic drain, or the default differential-pressure type - both are orderable in the same size 200, 1/4 in port configuration.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GF200-08 Filter (GF20008MJT)

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GF20008MJT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.