verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GF200 · Air Filter (water separation + particulate filtration)

AirTAC GF200-08 Filter (GF20008MT)

The AirTAC GF200-08 Filter (GF20008MT) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with PT1/4" ports and a manual drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.

  • TypeAir filter
  • Port sizePT1/4"
  • Filtering grade40 µm
  • DrainManual drain
  • Inlet pressure0 - 0.9 MPa (0 - 131 psi)
  • Bowl materialPC
  • ThreadNPT
  • BracketMounting bracket included
$21.85 $29.35Save 25% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GF200 stroke, mounting and version on one page All GF200 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GF200-08 Filter (GF20008MT)

The AirTAC GF20008MT is a G-series air filter that removes water and particulate from compressed air. It is filtration only - no pressure regulation and no lubrication. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Because of the manual drain, the maximum inlet pressure for this configuration is 0.9 MPa. The PC (polycarbonate) bowl carries a mounting bracket as standard.

This is a genuine AirTAC part from the G series, which spans sizes 200, 300, 400 and 600, with differential-pressure and automatic drains, a 5 um fine element, and G (BSPP) or NPT threads as options. Published flow data appears as curves rather than a single rating, so contact us and we will confirm the flow figures and full datasheet on request.

AirTAC GF200-08 Filter (GF20008MT) Technical Specifications

ModelAirTAC GF200-08 Filter (GF20008MT)
SeriesGF200 air filter
Port sizePT1/4" (NPT thread)
Filtering grade40 µm
Drain typeManual drain
BracketMounting bracket included
FluidCompressed air
Inlet pressure0 - 0.9 MPa (0 - 131 psi)
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Bowl materialPC
FeatureLow pressure loss

Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GF200-08 Filter (GF20008MT)

GF200G-series air filter, 200 body — sets the port range.
08Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4".
MDrain: Manual drain. Options are differential (blank), automatic (A) or manual (M).
(blank)Mounting bracket included. A bracket ships by default; J orders it without.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.

Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.

Size Class

  • GF200PT1/8" - PT1/4"
  • GF300PT1/4" - PT1/2"
  • GF400PT3/8" - PT1/2"
  • GF600PT3/4" - PT1"

A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.

This modelGF200 · PT1/4" · 40 µm
One size upGF300
Line orderFilter first, then regulator, then lubricator

Where the AirTAC GF200-08 Filter (GF20008MT) Is Used

conveyor_belt

Conveyor pneumatic drives

Installed on the air supply to conveyor gate cylinders and diverters in a warehouse line, with the manual drain emptied during planned shift maintenance stops.

factory

Small plant utility air rings

Fitted at the head of a utility air ring main in a small fabrication shop, filtering moisture and debris from the compressor output before distribution to workstations.

air

Tire inflation and service bays

Used on service-bay air outlets feeding inflation gauges and pneumatic jacks, with operators draining the bowl manually at the end of each shift.

Is the AirTAC GF200-08 Filter (GF20008MT) the Right Filter?

Size 200 with a 1/4 inch NPT port is the entry step of the G series; step up to sizes 300, 400 or 600 for larger ports and higher flow. The M suffix specifies the manual drain, which suits installations where an operator can bleed the bowl on a schedule - choose the default differential-pressure drain or the automatic drain (A) for unattended lines. Note the manual-drain inlet pressure limit of 0.9 MPa. The default element is 40 um; the W suffix gives a 5 um fine grade. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

Flow is published as curves, not a single rated figure, so please ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1/4" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain: differential, automatic or manual
  • ✓ Manual drain caps inlet at 0.9 MPa
  • ✓ Thread PT, G (BSPP) or NPT
  • ✓ Bracket needed, or order with J
Ask an Engineer

Installation & Maintenance Notes

  • check Mount vertically, bowl down, and follow the airflow arrow.
  • check Put the filter first in the air-preparation line.
  • check Keep inlet pressure within 0 - 0.9 MPa (0 - 131 psi).
  • check Drain condensate before the bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Replace the 40 µm element when pressure loss rises.

The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.

AirTAC GF200-08 Filter (GF20008MT) FAQ

AirTAC publishes flow for the GF20008MT as curves, not as a single rated number, so we cannot state a rated figure in good faith. Tell us your line conditions and we will confirm the flow figures and datasheet on request before you order.

The M suffix means condensate is emptied by hand from the bowl, which suits attended installations on a maintenance schedule; the default differential-pressure drain discharges automatically with flow, and the A suffix adds a fully automatic drain. Also note the manual-drain version's maximum inlet pressure is 0.9 MPa.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GF200-08 Filter (GF20008MT)

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GF20008MT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.