verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GF300 · Air Filter (water separation + particulate filtration)

AirTAC GF300-15T Filter (GF30015T)

The AirTAC GF300-15T Filter (GF30015T) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with PT1/2" ports and a differential-pressure drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.

  • TypeAir filter
  • Port sizePT1/2"
  • Filtering grade40 µm
  • DrainDifferential-pressure drain
  • Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
  • Bowl materialPC
  • ThreadNPT
  • BracketMounting bracket included
$28.36 $35.86Save 20% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GF300 stroke, mounting and version on one page All GF300 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GF300-15T Filter (GF30015T)

GF30015T is an AirTAC G-series GF air filter: filtration only, removing water and particulate from the compressed-air line, with no pressure regulation and no lubrication. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The polycarbonate bowl collects condensate, a mounting bracket is included, and the unit is rated for 1.0 MPa (145 psi) maximum working pressure at -5 to 70 C (non-freezing).

This is a genuine AirTAC part. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet and sizing for your application.

AirTAC GF300-15T Filter (GF30015T) Technical Specifications

ModelAirTAC GF300-15T Filter (GF30015T)
SeriesGF300 air filter
Port sizePT1/2" (NPT thread)
Filtering grade40 µm
Drain typeDifferential-pressure drain
BracketMounting bracket included
FluidCompressed air
Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Bowl materialPC
FeatureLow pressure loss

Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GF300-15T Filter (GF30015T)

GF300G-series air filter, 300 body — sets the port range.
15Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
(blank)Drain: Differential-pressure drain. Options are differential (blank), automatic (A) or manual (M).
(blank)Mounting bracket included. A bracket ships by default; J orders it without.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.

Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.

Size Class

  • GF200PT1/8" - PT1/4"
  • GF300PT1/4" - PT1/2"
  • GF400PT3/8" - PT1/2"
  • GF600PT3/4" - PT1"

A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.

This modelGF300 · PT1/2" · 40 µm
One size downGF200
One size upGF400
Line orderFilter first, then regulator, then lubricator

Where the AirTAC GF300-15T Filter (GF30015T) Is Used

factory

Stamping press plant air

Fit on the air drop serving a stamping press so the 40 um element catches water and rust particles before they reach the directional valves and press cylinders.

conveyor_belt

Bottling conveyor gate cylinders

Install upstream of the divert and gate cylinders along a bottling conveyor line, keeping condensate out of the valves that index containers down the line.

handyman

Maintenance shop air ring main

Use on the branch feeds of a maintenance shop ring main, filtering the air that powers impact wrenches, air ratchets and other hand-held pneumatic tools.

Is the AirTAC GF300-15T Filter (GF30015T) the Right Filter?

Match the GF size to your line: 200 (1/8-1/4 in), 300 (3/8-1/2 in), 400 (1/2-3/4 in) or 600 (3/4-1 in), checking the published flow curve rather than assuming from port alone. This unit uses the standard 40 um element; the W-coded 5 um grade is available on the same body if finer filtration is needed. Drain choices are the default differential-pressure type, automatic (A) or manual (M). This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow appears only as curves in the datasheet, not a single rating, so ask us to confirm sizing before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1/2" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain: differential, automatic or manual
  • ✓ Manual drain caps inlet at 0.9 MPa
  • ✓ Thread PT, G (BSPP) or NPT
  • ✓ Bracket needed, or order with J
Ask an Engineer

Installation & Maintenance Notes

  • check Mount vertically, bowl down, and follow the airflow arrow.
  • check Put the filter first in the air-preparation line.
  • check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
  • check Drain condensate before the bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Replace the 40 µm element when pressure loss rises.

The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.

AirTAC GF300-15T Filter (GF30015T) FAQ

AirTAC publishes G-series filter flow as performance curves rather than a single rated figure, so we do not quote one headline number. Tell us your working pressure and consumption and we will confirm the datasheet curve and whether size 300 is the right step for your application.

The catalogue default is a differential-pressure drain. Code A specifies an automatic drain that discharges condensate without operator attention, and code M is a manual drain emptied by hand. The drain is chosen when ordering and is fitted in the bowl of the filter.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GF300-15T Filter (GF30015T)

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GF30015T and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.