verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GF400 · Air Filter (water separation + particulate filtration)

AirTAC GF400-10 Filter (GF40010JWT)

The AirTAC GF400-10 Filter (GF40010JWT) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 5 µm element, with PT3/8" ports and a differential-pressure drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.

  • TypeAir filter
  • Port sizePT3/8"
  • Filtering grade5 µm
  • DrainDifferential-pressure drain
  • Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
  • Bowl materialPC
  • ThreadNPT
  • BracketSupplied without bracket
$41.79 $49.29Save 15% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GF400 stroke, mounting and version on one page All GF400 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GF400-10 Filter (GF40010JWT)

GF40010JWT is a genuine AirTAC G-series air filter in size 400 with a 3/8 in NPT port. It is a filtration-only unit for compressed air: no regulation and no lubrication are included. This configuration combines the finer 5 um filtering element (the W option, instead of the standard 40 um grade) with the differential-pressure drain as the catalogue default, and the J suffix means no mounting bracket. The bowl on the 400 size is polycarbonate, maximum working pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C (non-freezing).

This is a genuine AirTAC part. The G filter series is offered in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, 40 um standard or 5 um elements, and a choice of differential-pressure, automatic or manual drains. Flow is published as curves rather than a single rated figure, so tell us your application and we will confirm the datasheet figures for this model on request.

AirTAC GF400-10 Filter (GF40010JWT) Technical Specifications

ModelAirTAC GF400-10 Filter (GF40010JWT)
SeriesGF400 air filter
Port sizePT3/8" (NPT thread)
Filtering grade5 µm
Drain typeDifferential-pressure drain
BracketSupplied without bracket
FluidCompressed air
Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Bowl materialPC
FeatureLow pressure loss

Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GF400-10 Filter (GF40010JWT)

GF400G-series air filter, 400 body — sets the port range.
10Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2".
(blank)Drain: Differential-pressure drain. Options are differential (blank), automatic (A) or manual (M).
JSupplied without bracket. A bracket ships by default; J orders it without.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.

Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.

Size Class

  • GF200PT1/8" - PT1/4"
  • GF300PT1/4" - PT1/2"
  • GF400PT3/8" - PT1/2"
  • GF600PT3/4" - PT1"

A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.

This modelGF400 · PT3/8" · 5 µm
One size downGF300
One size upGF600
Line orderFilter first, then regulator, then lubricator

Where the AirTAC GF400-10 Filter (GF40010JWT) Is Used

science

Laboratory compressed air ring main

Point-of-use filtration on a laboratory air ring main feeding pneumatic apparatus, where the 5 um element provides finer filtration than general plant air grade.

engineering

Test bench air conditioning

The air inlet stage of a hydraulic and pneumatic test bench, protecting gauges and test circuits on the bench from fine particles with the 5 um element.

local_shipping

Truck body pneumatic controls

Filtration ahead of control valves on truck body-building equipment such as tail-lift and tipper test rigs, piped inline without a bracket on the rig frame.

Is the AirTAC GF400-10 Filter (GF40010JWT) the Right Filter?

Keep size 400 with the 3/8 in NPT port to match your piping; go to 600 where larger flow demand applies or to 300/200 for compact installations, and have us confirm the flow curve against your duty before ordering, since no single rated flow figure is published. This code pairs the 5 um element with the differential-pressure drain - a good fit where you need finer-than-standard filtration at a normally flowing point of use. If the location needs hands-off condensate removal, choose the automatic drain version (A) instead. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue thread options you can order, and the version without the J suffix adds a mounting bracket.

Quick checklist

  • ✓ Body size for your peak flow (PT3/8" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain: differential, automatic or manual
  • ✓ Manual drain caps inlet at 0.9 MPa
  • ✓ Thread PT, G (BSPP) or NPT
  • ✓ Bracket needed, or order with J
Ask an Engineer

Installation & Maintenance Notes

  • check Mount vertically, bowl down, and follow the airflow arrow.
  • check Put the filter first in the air-preparation line.
  • check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
  • check Drain condensate before the bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Replace the 5 µm element when pressure loss rises.

The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.

AirTAC GF400-10 Filter (GF40010JWT) FAQ

Flow for the G series is published as curves rather than as a single rated figure, so we do not quote a number here. Send us your application and required flow and we will confirm the datasheet curve and check that size 400 with a 3/8 in NPT port is correctly sized, on request.

The J suffix on this model means no mounting bracket is included, so it is normally piped inline between fittings. If you want to fix the filter to a panel or wall, order the same filter without the J suffix, which includes the bracket.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GF400-10 Filter (GF40010JWT)

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GF40010JWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.