verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GF400 · Air Filter (water separation + particulate filtration)

AirTAC GF400-10T Filter (GF40010T)

The AirTAC GF400-10T Filter (GF40010T) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with PT3/8" ports and a differential-pressure drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.

  • TypeAir filter
  • Port sizePT3/8"
  • Filtering grade40 µm
  • DrainDifferential-pressure drain
  • Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
  • Bowl materialPC
  • ThreadNPT
  • BracketMounting bracket included
$43.29 $50.79Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GF400 stroke, mounting and version on one page All GF400 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GF400-10T Filter (GF40010T)

The AirTAC GF series is a compressed-air filter only: it strips water and particulate out of the air line, with no pressure regulation and no lubrication. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The polycarbonate bowl is standard at this size, the maximum working pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C, non-freezing.

This is a genuine AirTAC part distributed for the US market. The G-series filter line runs from size 200 to 600 with ports from 1/8in to 1in, in three thread types (NPT on this code), with differential-pressure, automatic or manual drains and 40 or 5 micron elements. AirTAC publishes filter flow as performance curves rather than a single rated figure, so we confirm sizing and datasheet figures for your application on request. Order code GF40010T has NPT ports (the T in the code) for North American pipe fittings.

AirTAC GF400-10T Filter (GF40010T) Technical Specifications

ModelAirTAC GF400-10T Filter (GF40010T)
SeriesGF400 air filter
Port sizePT3/8" (NPT thread)
Filtering grade40 µm
Drain typeDifferential-pressure drain
BracketMounting bracket included
FluidCompressed air
Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Bowl materialPC
FeatureLow pressure loss

Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GF400-10T Filter (GF40010T)

GF400G-series air filter, 400 body — sets the port range.
10Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2".
(blank)Drain: Differential-pressure drain. Options are differential (blank), automatic (A) or manual (M).
(blank)Mounting bracket included. A bracket ships by default; J orders it without.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.

Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.

Size Class

  • GF200PT1/8" - PT1/4"
  • GF300PT1/4" - PT1/2"
  • GF400PT3/8" - PT1/2"
  • GF600PT3/4" - PT1"

A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.

This modelGF400 · PT3/8" · 40 µm
One size downGF300
One size upGF600
Line orderFilter first, then regulator, then lubricator

Where the AirTAC GF400-10T Filter (GF40010T) Is Used

engineering

Bench pneumatic press supply

Filtering plant air feeding a bench-mounted pneumatic press, dropping condensed water and pipe scale out of the line ahead of the downstream regulator station and press cylinder.

factory

Packaging machine air drops

Point-of-use filtration on the air drops serving a carton-forming and taping machine, catching rust particles and water carried over from the factory distribution main before they reach the machine's valves.

air

Workshop ring main take-offs

A general-purpose filter at take-off points on a workshop compressed-air ring main, where size 400 with 3/8in ports matches the diameter of the branch line feeding hand tools and small cylinders.

Is the AirTAC GF400-10T Filter (GF40010T) the Right Filter?

Size 400 with 3/8in NPT ports matches 3/8in branch lines; the step to size 600 (larger ports, higher flow capacity) or down to size 300 is a pure pipe-size and flow decision. The standard element here is 40 micron for general water and particle removal; order the W variant if the application needs the 5 micron grade. Drain choices are the differential-pressure default, automatic (A) or manual (M); threads come as three thread types (NPT on this code), and a mounting bracket is included unless a no-bracket variant is specified. Flow is published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT3/8" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain: differential, automatic or manual
  • ✓ Manual drain caps inlet at 0.9 MPa
  • ✓ Thread PT, G (BSPP) or NPT
  • ✓ Bracket needed, or order with J
Ask an Engineer

Installation & Maintenance Notes

  • check Mount vertically, bowl down, and follow the airflow arrow.
  • check Put the filter first in the air-preparation line.
  • check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
  • check Drain condensate before the bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Replace the 40 µm element when pressure loss rises.

The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.

AirTAC GF400-10T Filter (GF40010T) FAQ

AirTAC publishes filter flow as performance curves rather than a single rated figure, so there is no one number to quote. Send us your line pressure and flow requirement and we will confirm sizing from the datasheet on request.

A blank drain position means the differential-pressure drain, which is the default for the GF family. If you prefer automatic or manual drainage, the same size 400, 3/8in unit is available as GF40010A (automatic) or GF40010M (manual).

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GF400-10T Filter (GF40010T)

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GF40010T and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.