verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC300 · Two-Unit Set (filter regulator + lubricator)

Airtac GFC Two-Unit Air Preparation Combinations GFC30010MF1T

The AirTAC GFC Two-Unit Air Preparation Combinations GFC30010MF1T is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 40 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT3/8"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade40 µm
  • DrainManual drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$95.65 $103.15Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC300-10 drain, gauge and thread option on one page All GFC300-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GFC Two-Unit Air Preparation Combinations GFC30010MF1T

The AirTAC GFC300-10 is a two-unit air-treatment set that combines a filter-regulator with a lubricator, so one assembly cleans compressed air, holds outlet pressure steady and adds oil mist for downstream pneumatic tools and cylinders. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Maximum inlet pressure is 1.0 MPa (145 psi), the standard regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), and the operating temperature range is -5 to 70 C (non-freezing). The bowls on the 300 size are polycarbonate (PC).

This is a genuine AirTAC part. The GFC two-unit family is available in 200, 300, 400 and 600 sizes with port sizes from 1/8 in to 1 in, a choice of 40 um or 5 um (code W) filtration, manual, automatic or differential-pressure drains, square or round gauges with MPa, psi or bar scales, and three thread types (NPT on this code) as order options. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering. Order code GFC30010MF1T has NPT ports (the T in the code) for North American pipe fittings.

Airtac GFC Two-Unit Air Preparation Combinations GFC30010MF1T Technical Specifications

ModelAirtac GFC Two-Unit Air Preparation Combinations GFC30010MF1T
SeriesGFC300 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT3/8" (NPT thread)
Filtering grade40 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialPC
Pressure gaugeFitted — square, MPa scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: Airtac GFC Two-Unit Air Preparation Combinations GFC30010MF1T

GFC300G-series two-unit set, 300 body — sets the port range.
10Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
1Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-10 filter regulator and GL300-10 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC300 · PT3/8" · 40 µm
One size downGFC200
One size upGFC400
Three-unit equivalentGC300-10
Build orderFilter regulator first, lubricator last

Where the Airtac GFC Two-Unit Air Preparation Combinations GFC30010MF1T Is Used

conveyor_belt

Bottling line stopper and clamp cylinders

On a bottling or canning line, cylinder-actuated clamps and stoppers run continuously. This set filters water and debris from the plant air, regulates the pressure feeding the cylinders, and meters oil mist to keep seals and moving parts lubricated through every shift.

build

Automotive assembly impact-wrench stations

At a workshop bench where impact wrenches and air ratchets are used all day, the filter-regulator half delivers clean air at a set working pressure for consistent tool torque, while the lubricator feeds oil mist to extend tool life between services.

precision_manufacturing

Packaging machine pick-and-place actuators

On packaging machinery with pneumatic pick-and-place heads and grippers, this two-unit set conditions the supply at the machine inlet: 40 um filtration, a stable regulated pressure for repeatable motion, and lubrication for the actuator internals.

Is the Airtac GFC Two-Unit Air Preparation Combinations GFC30010MF1T the Right Set?

Start with the port and size: the 300 size steps up to NPT3/8 and suits lines that need more air than the 200 size, but the right step depends on the flow your circuit actually draws. Choose the drain to match maintenance habits: manual drain (this model) needs someone to open it periodically, while automatic and differential-pressure drains empty themselves. The 40 um element is the standard grade for general plant air; specify 5 um (code W) only where finer particulate removal is required. The square gauge is fitted here with an MPa scale, and psi or bar scales plus an external round gauge are available. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue options to order. A mounting bracket is included.

Because flow is published as curves and not as a single rated number, we do not quote a rated flow figure. Send us your application details and we will confirm the datasheet and check the sizing against your demand before you order.

Quick checklist

  • ✓ Body size for your peak flow (PT3/8" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-10 filter regulator on its own.

Airtac GFC Two-Unit Air Preparation Combinations GFC30010MF1T FAQ

AirTAC publishes flow for the GFC series as curves rather than a single rated figure, so we do not state a rated flow number. Tell us your port size, line pressure and the air demand of your equipment, and we will confirm the datasheet and check the sizing against your application before you order.

The M in GFC30010MF1T specifies a manual drain on the filter bowl: condensate is released by opening the drain valve during maintenance checks. If the installation is hard to reach or runs unattended, the automatic or differential-pressure drain versions empty the bowl themselves. All three drain types are catalogue options across the GFC range.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GFC Two-Unit Air Preparation Combinations GFC30010MF1T

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GFC30010MF1T and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.