
The AirTAC GFC200-08 Combination Unit (GFC20008F1WTK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC20008F1WTK is a two-unit air-treatment set - filter regulator plus separate lubricator - with both the W code 5 um filter element and a reverse/check valve (K) fitted in the regulator. Air is finely filtered, regulated with downstream pressure held through supply dips, then oil-mist lubricated. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
This is a genuine AirTAC part. The GFC family is offered in sizes 200 through 600 with drain, element, gauge, thread and check-valve options, so this code can be matched or stepped up as your line grows. Max working pressure is 1.0 MPa (145 psi), operating temperature is -5 to 70 C (non-freezing), and the PC bowl suits this size. Flow is published as curves, not a single rating - we confirm the datasheet on request.
| Model | AirTAC GFC200-08 Combination Unit (GFC20008F1WTK) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Conditions the air supplying pneumatic actuators on automated process valves, with the check valve holding the regulated set point and the 5 um element protecting the positioner air.
Feeds the pneumatic control group of a dock loader or vehicle-mounted handling equipment, filtering fine particulate, regulating pressure and retaining it against supply dips via the check valve.
Installed as the treatment point at a bench or workstation air drop, delivering clean, regulated, lubricated air to impact tools, riveters and small clamps used through the shift.
This code combines three decodable choices: the 5 um W element for finer filtration, the K reverse/check valve to hold regulated pressure through upstream dips, and the 200 size with 1/4 inch NPT port for lighter duties - move to 300/400/600 for larger ports and flow. Drain is differential-pressure here; automatic (A) or manual (M) are available, and manual widens the regulator range to 0.05-0.9 MPa (7-130 psi) versus 0.15-0.9 MPa (20-130 psi) on this version. The embedded square gauge reads in MPa; other scales are offered. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Flow is published as curves, not a single rated number, so ask us to confirm sizing from the datasheet before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
There is no single rated figure to quote: AirTAC publishes G-series flow as curves. We will confirm the datasheet and flow curve for this 200-size, 1/4 inch port two-unit set on request, and can check it against your demand before you order.
W upgrades the filter element from the standard 40 um to 5 um for finer particulate removal, and K fits a reverse/check valve in the regulator so downstream pressure is held through brief supply dips. Everything else matches the base code: 200 size, 1/4 inch NPT port, differential-pressure drain and the embedded square MPa gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.