
The AirTAC GFC200-08 Combination Unit (GFC20008LF1WT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC series pairs a filter-regulator with a lubricator in a two-piece set, covering filtration, pressure regulation and oil-mist lubrication of compressed air in one order. This GFC20008LF1WT is the 200 size with NPT1/4 ports, the W grade 5 um filter element, a differential-pressure drain on the bowl and the L low-pressure regulator type, with an embedded square gauge scaled in MPa. Both bowls on this 200-size set are polycarbonate.
This is a genuine AirTAC part. The G series is built in 200, 300, 400 and 600 sizes, with three thread types (NPT on this code), automatic, manual or differential-pressure drains, and 40 um standard or 5 um (W) filtration. Maximum working pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rated figure, so we confirm datasheet and sizing numbers on request.
| Model | AirTAC GFC200-08 Combination Unit (GFC20008LF1WT) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Feeds the pneumatic actuators on a laboratory sample-handling skid, where 5 um-filtered, regulated and lubricated air keeps small cylinders moving cleanly and consistently.
A press-side set for the squeegee and clamp cylinders of a screen printing machine, holding a stable set point so print stroke pressure stays repeatable.
Mounted on a valve actuation test bench to deliver clean, pressure-regulated, oil-misted air to the actuators being cycled during testing.
Choose the 200, 300, 400 or 600 size to match your port and demand; This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The W element filters to 5 um instead of the 40 um standard, the right choice ahead of spray equipment and precision pneumatics. The differential-pressure bowl drains as pressure drops, while automatic (A) and manual (M) drains are orderable alternatives. Standard GFC regulators with a differential-pressure drain adjust from 0.15 to 0.9 MPa (20-130 psi); this is the L low-pressure type, so please confirm its exact setting range with us before ordering. Flow is published as curves, not a single rating, so send us your demand and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
AirTAC publishes flow for the G series as curves rather than a single rated number, so there is no one figure to quote here. Tell us your line pressure and air demand and we will confirm the sizing from the datasheet on request.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. just tell us which thread your pipework uses when you enquire.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.