
The AirTAC GFC200-08 Combination Unit (GFC20008MC3WT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/4" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
GFC20008MC3WT is a genuine AirTAC G-series two-unit air preparation set: a filter regulator paired with a lubricator. It removes water and particulate from compressed air, holds downstream pressure steady and adds oil mist for valves, cylinders and air tools. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Pressure is read on a round gauge scaled in bar. Maximum working pressure is 1.0 MPa (145 psi), the manual-drain regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), and operating temperature is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rated figure, so we confirm datasheet numbers on request.
| Model | AirTAC GFC200-08 Combination Unit (GFC20008MC3WT) |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-08 filter regulator and GL200-08 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-08 |
| Build order | Filter regulator first, lubricator last |
Feeds spray guns in a finishing booth where the 5 um element screens finer particles ahead of the nozzle set, while the lubricator stage stays isolated to air tools rather than the paint-side drop.
Conditions the air behind benchtop instruments and pneumatic actuators on an analytical bench, where the finer 5 um grade and a stable set pressure help keep sensitive equipment fed cleanly.
Supplies pick-and-place cylinders and small clamps on an assembly fixture line, with 5 um filtration protecting compact valve packages and the mist stage lubricating high-cycle cylinders.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The bowl drain is manual, with automatic and differential-pressure drains available as alternatives. Larger sizes (300, 400, 600) step up port and flow capacity, and pressure is read on a round bar gauge; square gauges with MPa, psi or bar scales can be ordered instead.
Thread is three thread types (NPT on this code). Since G-series flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-08 filter regulator on its own.
Yes - on request. AirTAC publishes G-series flow as curves rather than a single rated figure, so we do not state a number on the page. Share your line pressure and downstream demand and we will confirm the datasheet figures with you.
The W suffix fits a finer 5 um element, suited to compact valves, instruments and other equipment that tolerates less particulate than the standard 40 um grade allows. The trade-off is a stricter element to keep drained, so the manual drain on this code should be bled regularly.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.