verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC300 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC300-10 Combination Unit (GFC30010AC1TK)

The AirTAC GFC300-10 Combination Unit (GFC30010AC1TK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT3/8"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade40 µm
  • DrainAutomatic drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$109.19 $116.69Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC300-10 drain, gauge and thread option on one page All GFC300-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC300-10 Combination Unit (GFC30010AC1TK)

GFC30010AC1TK is a two-piece AirTAC G-series set combining a filter regulator and a lubricator, with a reverse (check) valve fitted so flow cannot run backwards through the set. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. With the automatic drain, the regulator adjusts 0.15-0.9 MPa (20-130 psi).

It is a genuine AirTAC part for compressed air, rated to a maximum working pressure of 1.0 MPa (145 psi) and -5 to 70 C (non-freezing). The same set is available without the check valve, and the GFC family spans sizes 200, 300, 400 and 600 in 1/8 to 1 inch ports with drain, filter-grade, gauge and thread options. Flow is published as curves rather than a single rated figure, so we confirm datasheet figures on request.

AirTAC GFC300-10 Combination Unit (GFC30010AC1TK) Technical Specifications

ModelAirTAC GFC300-10 Combination Unit (GFC30010AC1TK)
SeriesGFC300 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT3/8" (NPT thread)
Filtering grade40 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeAutomatic drain
Bowl materialPC
Pressure gaugeFitted — round, MPa scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC300-10 Combination Unit (GFC30010AC1TK)

GFC300G-series two-unit set, 300 body — sets the port range.
10Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
ADrain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
CGauge shape: Round. C is round, F is square.
1Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-10 filter regulator and GL300-10 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC300 · PT3/8" · 40 µm
One size downGFC200
One size upGFC400
Three-unit equivalentGC300-10
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC300-10 Combination Unit (GFC30010AC1TK) Is Used

valve

Shared valve-manifold branch

Protects a branch tapped off a shared plant air main that feeds directional control valves; the fitted reverse (check) valve blocks backflow from downstream toward the set.

build

Pneumatic press hold-downs

Feeds the hold-down cylinders of a small pneumatic press with filtered, regulated, lubricated air, while the external MPa gauge supports quick pressure verification during setup.

science

Lab test-rig actuators

Supplies a laboratory test rig's air actuators; the 40 um element and automatic drain keep particulate and condensate out of the rig between test runs.

Is the AirTAC GFC300-10 Combination Unit (GFC30010AC1TK) the Right Set?

The K suffix is the only difference from the GFC30010AC1: it adds a reverse (check) valve, useful when a set feeds a branch where downstream backflow is possible. Otherwise the decodable choices are the same - sizes 200 to 600 with 1/8 to 1 inch ports, the 40 um standard element versus the 5 um (W) option, and automatic, manual or differential-pressure drains. Flow is published as curves, so ask us to confirm sizing against your application before ordering.

The C1 suffix specifies the external round gauge in MPa, with psi and bar scales as catalogue alternatives. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are orderable options.

Quick checklist

  • ✓ Body size for your peak flow (PT3/8" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-10 filter regulator on its own.

AirTAC GFC300-10 Combination Unit (GFC30010AC1TK) FAQ

No single rated flow figure is quoted, because AirTAC publishes G-series flow as performance curves rather than one number. Send us your application details and we will confirm the sizing against the datasheet on request.

K fits a reverse (check) valve in the set; without it the GFC30010AC1 is otherwise identical - same 40 um filter, automatic drain, NPT3/8 ports and external MPa gauge. The check valve prevents reverse flow through the set, and the regulation range stays 0.15-0.9 MPa (20-130 psi) with the automatic drain.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC300-10 Combination Unit (GFC30010AC1TK)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GFC30010AC1TK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.