
The AirTAC GFC300-10 Combination Unit (GFC30010AC3T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
GFC30010AC3T is a genuine AirTAC G-series two-unit set combining a filter regulator with a lubricator, so one purchase covers filtration, pressure regulation and oil-mist lubrication of compressed air. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Maximum working pressure is 1.0 MPa (145 psi); with automatic drain the regulator adjusts across 0.15-0.9 MPa (20-130 psi), and the operating temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the G series, available in 200, 300, 400 and 600 sizes with manual, automatic or differential-pressure drains, optional 5 um fine filtration, gauge scales in MPa, psi or bar, and three thread types (NPT on this code). Flow is published by AirTAC as curves rather than one rated value, so we confirm datasheet and flow figures for your line on request.
| Model | AirTAC GFC300-10 Combination Unit (GFC30010AC3T) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-10 filter regulator and GL300-10 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT3/8" · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-10 |
| Build order | Filter regulator first, lubricator last |
Placed upstream of a solenoid valve manifold controlling plant actuators: the 40 um element and regulator protect and condition the supply while the lubricator oils the downstream air consumers.
Fitted on the air supply to loading-dock door and leveller cylinders, where the automatic drain copes with condensate from outdoor mains and the bar gauge matches the site's existing gauges.
Installed at the inlet of a pneumatic test bench, giving technicians a regulated, lubricated and filtered supply with visible bar-scale pressure for repeatable test set-ups.
The 300 size with a 3/8 in port suits mid-range air demand; move to 200 for compact drops or to 400/600 where the flow curves demand larger piping. This code's automatic drain removes condensate without operator attention, and the round bar-scaled gauge suits shops that read pressure in bar; select MPa or psi scales on other codes if that is your house standard. Filtration here is the standard 40 um element - step to a W-suffixed code for 5 um if you protect fine pneumatic valves. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-10 filter regulator on its own.
No single rated flow is quoted for this set because AirTAC publishes performance as flow curves. Tell us your inlet pressure and the demand of the equipment it feeds and we will confirm the correct size from the datasheet on request.
The default bowl drain is differential-pressure operated; A in the code selects the automatic drain, which ejects collected condensate without manual intervention. Note the regulator adjustment range differs by drain type: with automatic drain it is 0.15-0.9 MPa (20-130 psi), while manual-drain versions adjust from 0.05 MPa.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.