verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC300 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC300-10 Combination Unit (GFC30010AF3WT)

The AirTAC GFC300-10 Combination Unit (GFC30010AF3WT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT3/8"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade5 µm
  • DrainAutomatic drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$94.26 $101.76Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC300-10 drain, gauge and thread option on one page All GFC300-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC300-10 Combination Unit (GFC30010AF3WT)

The AirTAC GFC30010AF3WT is a two-unit air preparation set: a filter-regulator paired with a lubricator. The filter-regulator section removes water and particulate down to 5 um (the finer W grade) while holding downstream pressure steady, and its automatic drain ejects collected condensate without anyone opening the bowl. The lubricator then meters oil mist into the clean, regulated air to serve downstream cylinders and air tools. The 300 size is fitted with NPT3/8 ports, and the regulator carries an embedded square gauge scaled in bar.

This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 inch, and the set can alternatively be ordered with the 40 um standard element, a manual or differential-pressure drain, a round external gauge with MPa, psi or bar scale, and G (BSPP) or NPT threads in place of NPT. Flow for this series is published as curves rather than a single rating, so ask us to confirm sizing and the datasheet for your application.

AirTAC GFC300-10 Combination Unit (GFC30010AF3WT) Technical Specifications

ModelAirTAC GFC300-10 Combination Unit (GFC30010AF3WT)
SeriesGFC300 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT3/8" (NPT thread)
Filtering grade5 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeAutomatic drain
Bowl materialPC
Pressure gaugeFitted — square, bar scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC300-10 Combination Unit (GFC30010AF3WT)

GFC300G-series two-unit set, 300 body — sets the port range.
10Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
ADrain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
3Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-10 filter regulator and GL300-10 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC300 · PT3/8" · 5 µm
One size downGFC200
One size upGFC400
Three-unit equivalentGC300-10
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC300-10 Combination Unit (GFC30010AF3WT) Is Used

factory

Automotive trim-line fastening drops

Impact wrenches and screwdrivers at a car-body trim station need dry, pressure-stable, lubricated air. This set filters to 5 um, regulates the drop and oils the tools at each 3/8 in take-off, with the auto drain handling condensate on a line that runs all shift.

precision_manufacturing

CNC fixture clamp circuits

Pneumatic clamps on a machining-centre fixture circuit depend on clean, regulated air. Mounted in the cabinet, this two-unit set removes water and swarf down to 5 um, holds clamp pressure steady and lubricates the clamp cylinders.

conveyor_belt

Packaging conveyor pusher cylinders

The air cylinders that divert cartons on a packaging conveyor run hour after hour in dusty, humid plant air. Feeding them through this filter-regulator-lubricator set keeps moisture out of the valves and oil mist in the cylinder bores.

Is the AirTAC GFC300-10 Combination Unit (GFC30010AF3WT) the Right Set?

Choose the 300 size with NPT3/8 ports when your line plumbing is 3/8 inch and your demand sits in the mid range; step up to 400 or 600 for larger ports, or down to 200 for compact circuits. The automatic drain suits unattended or hard-to-reach installations, while manual and differential-pressure drains are the other catalogue choices. The 5 um W element is the right call when downstream valves and cylinders tolerate less particulate than the 40 um standard. This unit is the standard-pressure type with a 0.15-0.9 MPa (20-130 psi) adjusting range and a square bar-scale gauge; a round external gauge with MPa, psi or bar scale is available. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Because flow is published as curves, not a single rating, ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT3/8" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-10 filter regulator on its own.

AirTAC GFC300-10 Combination Unit (GFC30010AF3WT) FAQ

AirTAC publishes flow for the G series as curves rather than a single rated figure, so there is no one number we can quote. Send us your operating pressure and expected air demand and we will confirm sizing against the datasheet curves on request.

The GFC pairs a filter-regulator with a lubricator, so you get filtration, regulation and lubrication with one fewer body and one fewer set of connections than the three-piece GC. If your actuators do not need oil mist at all, a single GFR filter-regulator is the leaner choice.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC300-10 Combination Unit (GFC30010AF3WT)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GFC30010AF3WT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.