verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC300 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC300-10 Combination Unit (GFC30010ALNT)

The AirTAC GFC300-10 Combination Unit (GFC30010ALNT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT3/8"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade40 µm
  • DrainAutomatic drain
  • Bowl materialPC
  • Pressure gaugeNot fitted
  • ThreadNPT
$86.86 $94.36Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC300-10 drain, gauge and thread option on one page All GFC300-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC300-10 Combination Unit (GFC30010ALNT)

GFC30010ALNT is an AirTAC G-series two-unit set for compressed air: a filter regulator and a separate lubricator mounted as one preparation station. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The N code means no gauge is fitted. Maximum working pressure is 1.0 MPa (145 psi), the bowls are PC (polycarbonate) as is standard for the 300 size, and the working temperature range is -5 to 70 C (non-freezing).

The set covers filtration, pressure regulation and oil-mist lubrication in two matched bodies. Across the G series AirTAC offers sizes 200, 300, 400 and 600, ports from 1/8 in to 1 in, three thread types (NPT on this code), 40 um or 5 um filter grades, differential-pressure, automatic or manual drains, and square or round gauges in MPa, psi or bar scales. Flow is published as curves rather than a single rating, so ask us to confirm sizing and request the datasheet for this exact model.

AirTAC GFC300-10 Combination Unit (GFC30010ALNT) Technical Specifications

ModelAirTAC GFC300-10 Combination Unit (GFC30010ALNT)
SeriesGFC300 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT3/8" (NPT thread)
Filtering grade40 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeLow-pressure type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeAutomatic drain
Bowl materialPC
Pressure gaugeNot fitted
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC300-10 Combination Unit (GFC30010ALNT)

GFC300G-series two-unit set, 300 body — sets the port range.
10Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
ADrain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
LLow-pressure type. Blank is standard, L is the low-pressure type.
NNo pressure gauge (N).
(blank)Gauge shape: Factory standard. C is round, F is square.
(blank)Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-10 filter regulator and GL300-10 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC300 · PT3/8" · 40 µm
One size downGFC200
One size upGFC400
Three-unit equivalentGC300-10
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC300-10 Combination Unit (GFC30010ALNT) Is Used

conveyor_belt

Box-line hold-down cylinders

Supplies hold-down and side-shift cylinders on a corrugated box conveyor line, where the standard 40 um element gives economical protection for general-purpose cylinders and valves.

handyman

Workshop drops and hose reels

Conditions the air drops feeding hose reels, air ratchets and small cylinders around a maintenance workshop; with no gauge on the set, the bench regulator's own gauge sets the working pressure.

factory

Textile machine cylinder air

Feeds the small cylinders that lift yarn guides and tension arms on textile machinery, with lubrication conditioning the seals and the automatic drain handling condensate from long distribution runs.

Is the AirTAC GFC300-10 Combination Unit (GFC30010ALNT) the Right Set?

This model suits a circuit where another gauge already sets and shows the working pressure, since the N code omits the gauge; if you want one on the set, order the matching GFC300 model with a gauge code instead. The 40 um element is the standard grade for general circuit protection, with the 5 um grade available where finer filtration is needed, and the automatic drain chosen here bleeds condensate without daily attention. The L code makes this the low-pressure regulator type; standard automatic-drain units in the series adjust 0.15-0.9 MPa (20-130 psi), and we will confirm the low-pressure adjustment range on request.

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. AirTAC publishes flow as curves rather than a single rating, so ask us to confirm this model against your flow requirement before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT3/8" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-10 filter regulator on its own.

AirTAC GFC300-10 Combination Unit (GFC30010ALNT) FAQ

AirTAC publishes G-series flow as performance curves in the datasheet, not as a single rated figure, so there is no one number to quote here. Send us your line pressure and air demand and we will confirm this model against the curve and provide the datasheet on request.

The N in the code means no gauge is fitted. Gauges are selected by code when you order: an embedded square gauge or an external round gauge, in MPa (1), psi (2) or bar (3) scales. Order the matching model with the gauge code you want, or ask us to quote that variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC300-10 Combination Unit (GFC30010ALNT)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GFC30010ALNT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.