
The AirTAC GFC300-10 Combination Unit (GFC30010ANTK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The GFC family combines a filter regulator and a lubricator as a two-piece set, covering filtration, pressure regulation and oil-mist lubrication in one order. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The K suffix adds a reverse (check) valve, and the regulator section is the standard type.
This is a genuine AirTAC part. The G series comes in sizes 200, 300, 400 and 600 with a choice of ports, drain types, 40 um or 5 um filtration and three thread types (NPT on this code). Maximum working pressure is 1.0 MPa (145 psi), working temperature range is -5 to 70 C (non-freezing), and the size 300 bowls are polycarbonate. Flow is published as curves rather than a single rating, so we confirm datasheet figures on request. Order code GFC30010ANTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GFC300-10 Combination Unit (GFC30010ANTK) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-10 filter regulator and GL300-10 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT3/8" · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-10 |
| Build order | Filter regulator first, lubricator last |
Feeding a bank of directional control valves on a production machine, the set conditions the air and the check valve in the regulator section helps hold the regulated line when upstream supply dips.
On a dock-side test and service station for trailer and tail-lift actuators, the two-unit set gives filtered, regulated, lubricated air, with automatic draining suitable for an outdoor-adjacent working area.
In a robot cell where brief upstream pressure dips must not disturb actuator settings, the check-valve version of the two-unit set conditions the air while limiting back-flow at the prep point.
Size 300 with a 3/8" port suits general plant drops; move to size 400 or 600 for heavier demand. The K option fits a reverse (check) valve in the regulator section, which is the decodable difference from the plain GFC30010AN. The automatic drain means no manual bowl bleeding; a manual-drain version is available. The 40 um element is the standard grade, with a 5 um W option for finer protection. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue options to specify when ordering. A bracket is available for panel fixing.
Flow is published as curves, not a single rated figure, so ask us to confirm sizing from the datasheet against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-10 filter regulator on its own.
AirTAC publishes flow for the G series as curves rather than a single rated number, so there is no single rated-flow figure to quote. Send us your supply pressure, regulated pressure and demand, and we will confirm sizing from the datasheet curves on request.
K denotes that a reverse (check) valve is fitted in the regulator section; the plain GFC30010AN carries none. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.