verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC300 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC300-10 Combination Unit (GFC30010F3WT)

The AirTAC GFC300-10 Combination Unit (GFC30010F3WT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 5 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT3/8"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade5 µm
  • DrainDifferential-pressure drain
  • Bowl materialPC
  • Pressure gaugeFitted
  • ThreadNPT
$80.56 $88.06Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC300-10 drain, gauge and thread option on one page All GFC300-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC300-10 Combination Unit (GFC30010F3WT)

GFC30010F3WT is AirTAC's G-series two-unit air preparation set for compressed air: a filter-regulator plus a separately mounted lubricator, cleaning the air, holding a set downstream pressure and adding oil mist in one supply connection. This build is specified with the fine 5 um (W) element instead of the standard 40 um grade, together with the differential-pressure drain and an embedded square gauge scaled in bar. Ports are NPT3/8 in the 300 size.

It is a genuine AirTAC part. The G-series runs from size 200 to 600, with three thread types (NPT on this code), 40 um or 5 um filtration, differential-pressure, automatic or manual drains, MPa, psi or bar gauge scales and an optional check valve. Flow is published as curves rather than a single rating; ask us and we will confirm sizing and datasheet figures for your application on request.

AirTAC GFC300-10 Combination Unit (GFC30010F3WT) Technical Specifications

ModelAirTAC GFC300-10 Combination Unit (GFC30010F3WT)
SeriesGFC300 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT3/8" (NPT thread)
Filtering grade5 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeDifferential-pressure drain
Bowl materialPC
Pressure gaugeFitted — square, bar scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC300-10 Combination Unit (GFC30010F3WT)

GFC300G-series two-unit set, 300 body — sets the port range.
10Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
(blank)Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
3Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-10 filter regulator and GL300-10 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC300 · PT3/8" · 5 µm
One size downGFC200
One size upGFC400
Three-unit equivalentGC300-10
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC300-10 Combination Unit (GFC30010F3WT) Is Used

build

Furniture finishing spray booth

Supplies the HVLP spray guns in a woodshop finishing booth: the 5 um element cleans the air ahead of the guns, the regulator holds the gun supply pressure and the lubricator is there for the booth's air tools.

settings_input_component

Actuator bank on a bottling filler

Feeds the cylinder bank that lifts, diverts and stops bottles on a filler: clean, regulated, oiled air at one connection point, with the fine element protecting the smaller pilot components.

valve

Piloted process valves on a washdown skid

Installed ahead of air-piloted process valves on a wash or dosing skid, where the 5 um element keeps grit and water carryover out of the pilot ports and the regulator holds the valve supply steady.

Is the AirTAC GFC300-10 Combination Unit (GFC30010F3WT) the Right Set?

The key choice here is the element: this code carries the 5 um (W) grade for air that feeds finer equipment, while the plain code without W is the 40 um standard for general cylinder and tool air. Port-wise, NPT3/8 in the 300 size sits mid-range in the family; step to 200 for compact lines or to 400/600 for larger headers. The differential-pressure drain is standard here, with automatic and manual drain versions available as separate codes, and the square bar gauge can be swapped for MPa or psi scales to order. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue options. Runs on compressed air, -5 to 70 C, non-freezing.

Flow for this family is published as curves across pressure, not a single rating, so ask us to confirm the sizing of the GFC30010F3WT against your application before you order.

Quick checklist

  • ✓ Body size for your peak flow (PT3/8" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-10 filter regulator on its own.

AirTAC GFC300-10 Combination Unit (GFC30010F3WT) FAQ

AirTAC publishes flow for this series as curves across working pressure rather than a single rated figure, so we do not state one number. Send us your pressure and demand and we will confirm the correct size and datasheet figures on request.

The plain code is the 40 um standard grade for general cylinder and tool air; the W code specifies the 5 um grade for circuits feeding finer equipment such as spray guns, pilots and instrumentation. Both grades are orderable in this size, and we can confirm which suits your application from the datasheet on request.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC300-10 Combination Unit (GFC30010F3WT)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GFC30010F3WT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.