
The AirTAC GFC300-10 Combination Unit (GFC30010LC1T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
GFC30010LC1T is AirTAC's G-series two-unit air preparation set for compressed air: a filter-regulator plus a separately mounted lubricator, cleaning the air, holding a set downstream pressure and adding oil mist from one supply connection. This build is the low-pressure type (L) and is fitted with the optional external round gauge scaled in MPa; This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
It is a genuine AirTAC part. The G-series runs from size 200 to 600, with three thread types (NPT on this code), 40 um or 5 um filtration, differential-pressure, automatic or manual drains, and MPa, psi or bar gauge scales. Flow is published as curves rather than a single rating, and the adjust range of the low-pressure type should match your set pressure, so ask us and we will confirm sizing and datasheet figures on request.
| Model | AirTAC GFC300-10 Combination Unit (GFC30010LC1T) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-10 filter regulator and GL300-10 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT3/8" · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-10 |
| Build order | Filter regulator first, lubricator last |
Supplies the small grip and lift actuators on an automated sample-handling rig, where the low-pressure regulator type suits gentle actuation and the external round MPa gauge is easy to read at the bench.
Feeds the seal-bar and hold-down cylinders on a bagger: filtered, lubricated air regulated to the lower set pressure the sealing heads need, with the differential-pressure drain handling condensate.
Regulates and lubricates the air used on loading rollers and web guides on a film or paper converting line, where the low-pressure type holds the lighter set pressures the tension zone requires.
The decode choices here are the low-pressure L regulator type and the round MPa gauge: the embedded square gauge is the other option, with psi or bar scales orderable. The 300 size with NPT3/8 ports sits mid-range in the family; step to 200 for compact lines or to 400/600 for larger headers. This code carries the standard 40 um element and the differential-pressure drain; the 5 um element and automatic or manual drains are separate codes. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue options to order. Compressed air only, -5 to 70 C, non-freezing.
Because this is the low-pressure type, ask us to confirm the adjust range against your set pressure from the datasheet before ordering, and remember flow is published as curves, not a single rating, so we will verify sizing against your demand on request.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-10 filter regulator on its own.
AirTAC publishes flow for this series as curves across working pressure, not as a single rated figure, so we do not quote one number. Share your line pressure and air demand and we will confirm sizing and the datasheet figures on request.
It specifies the low-pressure type of regulator in the set, instead of the standard build. Tell us the downstream pressure your equipment needs and we will confirm the matching adjust range from the datasheet on request before you order.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.