
The AirTAC GFC300-10 Combination Unit (GFC30010LNT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC series is a two-piece air preparation set: a filter regulator plus a separate lubricator, so one purchase covers filtration, pressure regulation and oil-mist lubrication. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The N option means no gauge is fitted, which suits panels that carry their own pressure indication or machines where a local gauge is not wanted.
It is a genuine AirTAC part from a series offered in sizes 200, 300, 400 and 600, with ports from 1/8 in to 1 in and a choice of drain types, filter grades, gauge options and threads. Flow figures for the series are published as curves rather than a single rating, so ask us and we will confirm the relevant datasheet figures for your application on request. Order code GFC30010LNT has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GFC300-10 Combination Unit (GFC30010LNT) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-10 filter regulator and GL300-10 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT3/8" · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-10 |
| Build order | Filter regulator first, lubricator last |
Preparing air on trailer-mounted and vehicle-mounted equipment, where the gaugeless configuration suits a cramped enclosure that carries its own pressure indication and every component must earn its mounting space.
Feeding the drop lines at a maintenance shop's tool points, where the filter regulator keeps supply pressure steady for impact tools and ratchets and the lubricator delivers the oil mist those tools expect.
Supplying clean, regulated, lubricated pilot air to the positioners and pilot solenoids of large automated process valves, with no local gauge where the control panel already displays line pressure.
Pick this N variant when the machine's own panel already shows line pressure or when you simply want the regulator set and locked without a local gauge; gauge variants with square or round faces and MPa, psi or bar scales remain orderable on the same size. The 300 size with 3/8 in NPT ports is the mid-range step; go to 400/600 for larger porting and flow or 200 for compact panels. The differential-pressure drain is the default, with manual (M) and automatic (A) drains as options, and the 5 um (W) element is available if 40 um is too coarse. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. a bracket is included by default. Because flow is published as curves and not a single rating, ask us to confirm sizing against the datasheet before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-10 filter regulator on its own.
We do not quote a single rated flow because AirTAC publishes flow for the G series as performance curves. Give us your supply pressure, set pressure and air demand, and we will confirm the datasheet curve for this model on request so you can size the line properly.
The N suffix simply means no gauge is fitted. Gauge variants on the same size are catalogue options, including embedded square gauges and external round gauges with MPa, psi or bar scales. The drain here is the default differential-pressure type; manual (M) and automatic (A) drains are also orderable.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.