
The AirTAC GFC300-10 Combination Unit (GFC30010NWTK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 5 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The GFC series combines a filter regulator and a lubricator in one two-unit set, so filtration, pressure regulation and oil-mist lubrication arrive in a single order. This GFC30010NWTK is the 300 size with 3/8in NPT ports, the W-code 5 um filter element, and a reverse (check) valve fitted - the K code distinguishes it from the plain NW build. The polycarbonate (PC) bowls drain by differential pressure, and the set is supplied without a gauge. Maximum inlet pressure is 1.0 MPa (145 psi) and the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The same two-unit function is available across G-series sizes 200, 300, 400 and 600, with automatic or manual drains, the standard 40 um element, G (BSPP) or NPT threads instead of the NPT standard, gauge or no-gauge variants, and builds with or without the check valve. AirTAC publishes flow as characteristic curves rather than a single rated figure, so ask us to confirm curve data and the full datasheet for your application on request.
| Model | AirTAC GFC300-10 Combination Unit (GFC30010NWTK) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-10 filter regulator and GL300-10 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT3/8" · 5 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-10 |
| Build order | Filter regulator first, lubricator last |
Prepares air for ejection and kick-off cylinders on a high-cycle assembly press, where the fitted check valve blocks reverse flow in the supply run.
Supplies filtered, regulated and lubricated air to the clamp actuators around a robotic welding cell, with the 5 um element protecting the compact valve package.
Feeds diverter and pusher cylinders on a bottling line, holding a steady set pressure so containers are routed cleanly between fillers and packers.
Stay with the 300 size for 3/8in NPT ports, or step to another G-series size if its port options and curve-based flow suit the circuit better. The K code means a reverse (check) valve is fitted - choose this build where backflow through the unit must be blocked, or the plain NW build where it is not needed. The W code gives the 5 um element; drop to the standard 40 um element if general protection is sufficient. Drain is differential-pressure as ordered, with automatic (A) and manual (M) variants available. No gauge is fitted - square embedded and external round gauge options in MPa, psi or bar scale exist, as do G (BSPP) and NPT threads. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-10 filter regulator on its own.
There is no single published rated flow figure for this set - AirTAC states flow as characteristic curves. Share your line pressure and air demand and we will confirm the curve data and full datasheet on request before you order.
The K code means a reverse (check) valve is fitted, which blocks reverse flow through the unit. The otherwise identical GFC30010NW has no check valve, so pick this build where the circuit needs that protection and the plain build where it does not.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.