
The AirTAC GFC300-15 Combination Unit (GFC30015AC3T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC is a two-unit air-treatment set: a filter-regulator in one body paired with a separate lubricator, so it filters water and particulate, regulates pressure and adds oil mist in a compact 2-piece arrangement. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The regulator adjustment range with automatic drain is 0.15-0.9 MPa (20-130 psi) and the maximum working pressure is 1.0 MPa (145 psi). The bowl on the 300 size is polycarbonate.
This is a genuine AirTAC part from the G series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 inch to 1 inch and three thread types (NPT on this code). Published flow data appears as curves rather than a single rated figure, so we confirm flow and datasheet details on request before you order. Order code GFC30015AC3T has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GFC300-15 Combination Unit (GFC30015AC3T) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-15 filter regulator and GL300-15 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/2" · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-15 |
| Build order | Filter regulator first, lubricator last |
Feed a shop-floor pneumatic press or clamping fixture with clean, regulated and lubricated air at a set pressure, with the automatic drain keeping the bowl clear during continuous shift work.
Supply air cylinders and diverters on a packaging or material-handling conveyor line, where one set treats, regulates and lubricates the whole branch circuit.
Drop points on a factory compressed-air ring main that serve air tools and actuators, using the 1/2 inch NPT connection to match the branch pipe size.
Work through the decodable choices in order. Step the size (200/300/400/600) up or down against the pipe run and required air demand - here 300 with NPT1/2 ports. Drain type: automatic (this model) empties the bowl on its own, while manual and differential-pressure drains are alternative order options. Filter grade: 40 um is standard; order the W variant for 5 um. Gauge: this set has an external round gauge scaled in bar; square-gauge scales are also available. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Flow for these units is published as curves, not a single rating, so please ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-15 filter regulator on its own.
AirTAC publishes flow for the G series as performance curves rather than a single rated figure, so we do not quote one number here. Contact us and we will confirm the flow and full datasheet figures for the GFC300 300 size against your application before you order.
The A in the code gives an automatic drain, which ejects collected condensate from the filter bowl without operator attention - suited to unattended or multi-shift lines. Manual and differential-pressure drain versions of the same set are available as order options if you prefer scheduled draining.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.