
The AirTAC GFC300-15 Combination Unit (GFC30015ALF1T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The GFC30015ALF1T is an AirTAC G-series two-unit air preparation set: a 300-size filter regulator paired with a separate lubricator, covering filtration, regulation and oil-mist lubrication in two pieces. The L code marks the low-pressure regulator type for circuits running at gentle set pressures. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
It is a genuine AirTAC part, rated for a maximum working pressure of 1.0 MPa (145 psi) and -5 to 70 C non-freezing operation, with polycarbonate bowls on the 300 size. The G series spans sizes 200 to 600 with a choice of drain types, 40 um or 5 um filtration, gauge styles and scales, and three thread types (NPT on this code). Because flow is published as curves rather than a single rating, we confirm flow and datasheet figures for your application on request.
| Model | AirTAC GFC300-15 Combination Unit (GFC30015ALF1T) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-15 filter regulator and GL300-15 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/2" · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-15 |
| Build order | Filter regulator first, lubricator last |
Feeds the low-pressure pneumatic core-pull and ejector circuits of an injection molding machine, with the MPa dial giving the setter a clear set-point reference at the machine side.
Conditions air for impact wrenches and nutrunners at commercial-trailer assembly stations, where the lubricator mists oil into the tool supply to extend vane-motor life.
Runs diverter gates and stopper cylinders along a packaging conveyor at low regulated pressure, with the automatic drain clearing condensate between shifts.
At 1/2 inch NPT this 300-size set fits lines whose demand has stepped past 1/4-inch and 3/8-inch units; move to size 200 if consumption is small. The L code selects the low-pressure regulator type; its adjustment span differs from the standard type, so we confirm the exact range from the datasheet on request. Drain is automatic, so condensate leaves the bowl without operator attention. Filtration is the standard 40 um; order the W variant for 5 um. The F1 code specifies the square gauge with an MPa scale, and F3 (bar) or round external gauges are orderable alternatives. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating, so ask us to confirm sizing before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-15 filter regulator on its own.
We do not quote a rated flow because AirTAC publishes G-series performance as curves, not a single rating. Send your working pressure and air consumption and we will confirm the correct size from the datasheet curve before you order.
F selects the square gauge style and 1 sets its scale to MPa. F3 would read in bar, and round external gauges are also available. If you need a specific scale for your panel, we confirm the gauge options from the datasheet on request.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.