
The AirTAC GFC300-15 Combination Unit (GFC30015ALF1WTK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC series is a two-piece air preparation set: a filter regulator and a separate lubricator, giving you filtered, regulated and lubricated compressed air from one ordered unit. This configuration, GFC30015ALF1WTK, is size 300 with a 1/2 inch NPT port. The filter section carries a 5 um element (W grade) with an automatic drain (A), so condensate is ejected without manual intervention. The regulator is the low-pressure type (L) and is supplied with an embedded square gauge on the MPa scale; a reverse/check valve (K) is also fitted.
This is a genuine AirTAC part. The G series spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, and options including manual, automatic or differential-pressure drains, 40 um or 5 um filtration, square or round gauges, G (BSPP) or NPT threads, and a reverse/check valve. Flow figures are published as curves rather than a single rating, so we confirm the datasheet and sizing details on request.
| Model | AirTAC GFC300-15 Combination Unit (GFC30015ALF1WTK) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-15 filter regulator and GL300-15 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/2" · 5 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-15 |
| Build order | Filter regulator first, lubricator last |
Feeds the pneumatic clamps and end-of-arm grippers on a robotic spot-welding cell, where filtered, regulated and lightly oiled air keeps clamp cylinders cycling reliably through the shift.
Supplies the tape-head and flap-tuck cylinders on a carton sealer at the end of a packaging line, with the automatic drain handling condensate so the machine runs unattended.
Conditions the air feeding spray guns in a finishing booth, using the 5 um element to cut fine particulate before the air reaches the gun and the lubricator mists oil into the line.
Start with size and port: 200, 300, 400 and 600 step up in port and flow capacity, and this size 300 unit takes a 1/2 inch NPT connection. Choose the drain to suit the installation - automatic drain (as here) suits unattended duty, manual drain suits attended cells, differential-pressure drain is the catalogue default. Choose 40 um for general protection or 5 um (W) where finer particulate removal matters; this unit carries the 5 um element. The regulator can be ordered in the standard or low-pressure (L) type, with the square gauge in MPa, psi or bar scale; the K option adds a reverse/check valve. Threads come as three thread types (NPT on this code) to order.
Because flow is published as curves and not a single rated figure, ask us to confirm sizing against your air demand and the datasheet before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-15 filter regulator on its own.
AirTAC publishes flow for the G series as performance curves rather than a single rated figure, so we do not quote one number. Send us your air demand and operating pressure and we will confirm the sizing from the datasheet on request.
This model carries the A code, meaning an automatic drain that ejects collected condensate from the bowl without operator action. The alternatives in the range are manual drain (M), where an operator opens the drain, and the default differential-pressure drain. All three are catalogue choices across the GFC series.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.