
The AirTAC GFC300-15 Combination Unit (GFC30015ALNT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC series pairs a filter-regulator with a lubricator in one two-piece set, so a single order covers filtration, pressure regulation and oil-mist lubrication of compressed air. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. No pressure gauge is fitted (N code) and no reverse/check valve is included. With automatic drainage the regulator adjusts over 0.15-0.9 MPa (20-130 psi), maximum inlet pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). On this size 300 set both bowls - the filter-regulator bowl and the lubricator bowl - are polycarbonate (PC).
This is a genuine AirTAC part. The G series is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in, plus options such as 5 um filter elements (W), manual or differential-pressure drains, gauge configurations with MPa, psi or bar scales, and three thread types (NPT on this code). Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application before ordering. Order code GFC30015ALNT has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GFC300-15 Combination Unit (GFC30015ALNT) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-15 filter regulator and GL300-15 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/2" · 40 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-15 |
| Build order | Filter regulator first, lubricator last |
Feeds filtered, regulated and lubricated air to the clamping cylinders and tool-changer actuators on a CNC machining centre, with automatic drainage protecting the circuit on machines running unattended shifts.
Supplies a carton-sealing or shrink-wrap conveyor line where sealing jaws and pusher cylinders need one compact order covering water removal, pressure setting and oil mist for the cylinders.
A point-of-use set for assembly benches running air tools and small cylinders, conditioning the shop-air drop at each workstation instead of relying on the whole plant supply.
Start with port size: the size 300 body carries NPT1/2 in ports here, and the larger 400 or 600 bodies (or the smaller 200) step the port and the flow curve up or down - match the step to the air consumption of the downstream cylinders and tools. This unit drains automatically, which suits unattended duty; the same set is also ordered with manual (M) or default differential-pressure drainage. The 40 um element is standard; choose the W option for 5 um filtration. This code has no gauge (N), but gauge versions with embedded square or optional external round gauges in MPa, psi or bar scales exist as catalogue codes. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT versions are catalogue options, and the J option removes the bracket. Note the low-pressure type (L) designation on this code. Because flow is published as curves rather than a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-15 filter regulator on its own.
AirTAC publishes flow for this series as performance curves, not as a single rated figure, so we do not quote a number. Ask us for the datasheet and we will confirm the flow curve and help you size the set against your actual air consumption before you order.
The trailing N in the code means no pressure gauge is fitted to the regulator. The GFC series is also available with an embedded square gauge or an optional external round gauge in MPa, psi or bar scales as separate catalogue codes - tell us your preferred gauge and scale and we will quote the right code.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.