verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC300 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC300-15 Combination Unit (GFC30015ALNWT)

The AirTAC GFC300-15 Combination Unit (GFC30015ALNWT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT1/2"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade5 µm
  • DrainAutomatic drain
  • Bowl materialPC
  • Pressure gaugeNot fitted
  • ThreadNPT
$86.86 $94.36Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC300-15 drain, gauge and thread option on one page All GFC300-15 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC300-15 Combination Unit (GFC30015ALNWT)

The AirTAC GFC two-unit set combines a filter regulator and a lubricator in a matched two-piece package, so compressed air is filtered, regulated and then oiled through a single purchase. This configuration, the GFC30015ALNWT, is the size 300 body with NPT1/2 (1/2 inch) NPT-threaded ports, a 5 um filter element (W grade) for finer particle and water removal than the standard 40 um element, an automatic drain on the filter bowl, and the low-pressure type regulator. No gauge is fitted (N code), and the polycarbonate bowls suit the working pressure of 1.0 MPa (145 psi).

This is a genuine AirTAC part from the G series, which spans sizes 200, 300, 400 and 600 with a choice of ports from 1/8 to 1 inch, thread options three thread types (NPT on this code), differential-pressure, automatic or manual drains, 40 um or 5 um filtration, and regulator variants including low-pressure type. Flow is published in the AirTAC catalogue as curves rather than a single rated figure, so we confirm datasheet figures on request before you order.

AirTAC GFC300-15 Combination Unit (GFC30015ALNWT) Technical Specifications

ModelAirTAC GFC300-15 Combination Unit (GFC30015ALNWT)
SeriesGFC300 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT1/2" (NPT thread)
Filtering grade5 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeLow-pressure type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeAutomatic drain
Bowl materialPC
Pressure gaugeNot fitted
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC300-15 Combination Unit (GFC30015ALNWT)

GFC300G-series two-unit set, 300 body — sets the port range.
15Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2".
ADrain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
LLow-pressure type. Blank is standard, L is the low-pressure type.
NNo pressure gauge (N).
(blank)Gauge shape: Factory standard. C is round, F is square.
(blank)Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-15 filter regulator and GL300-15 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC300 · PT1/2" · 5 µm
One size downGFC200
One size upGFC400
Three-unit equivalentGC300-15
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC300-15 Combination Unit (GFC30015ALNWT) Is Used

precision_manufacturing

CNC machining center air supply

Feeds cleaned, regulated and lubricated air to the tool-change cylinders and pneumatic clamps on a machining center, with the 5 um element protecting spool valves from fine contamination.

factory

Automotive paint-shop line preparation

Installed at the drop of a paint-shop air line so atomizing air to spray applicators is filtered to 5 um, held at a stable low pressure, and carries a fine oil mist for actuator life.

conveyor_belt

Packaging line case-erector cylinders

Supplies the air cylinders that erect and seal corrugated cases on a packaging conveyor line, keeping moisture and particles out of the valves while the lubricator mists the cylinder seals.

Is the AirTAC GFC300-15 Combination Unit (GFC30015ALNWT) the Right Set?

Size 300 with 1/2 inch NPT ports is a mid-to-large step in the G series; step up to 400 or 600 for bigger ports and more flow, or down to 200 for compact lines. On the filter side, the 5 um W element here is the finer choice against the 40 um standard - pick 5 um where downstream valves and instruments need cleaner air. Drain choice matters: this unit has an automatic drain, which suits unattended installations; manual and differential-pressure drains are available on other codes. The regulator here is the low-pressure type, and this code carries no gauge; gauge variants with MPa, psi or bar scales can be selected on other codes. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

Because AirTAC publishes flow as performance curves and not as one rated number, ask us to confirm sizing against your application - flow, and any figure not covered above - before placing the order.

Quick checklist

  • ✓ Body size for your peak flow (PT1/2" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-15 filter regulator on its own.

AirTAC GFC300-15 Combination Unit (GFC30015ALNWT) FAQ

AirTAC publishes flow for this series as performance curves rather than a single rated figure, so there is no one rated-flow number we can quote. Send us your application details and we will confirm the flow and sizing against the datasheet on request.

The N in the model code means no gauge is fitted; this two-unit set is ordered without one. Gauge variants across the GFC series do exist - an embedded square gauge is the standard option, with MPa, psi or bar scales available - so if you want a pressure readout, choose a code without the N or contact us and we will confirm the right part.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC300-15 Combination Unit (GFC30015ALNWT)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GFC30015ALNWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.