
The AirTAC GFC300-15 Combination Unit (GFC30015LF1WT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 5 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The GFC family combines a filter-regulator and a separate lubricator in one two-piece set, so a single assembly filters, regulates and lubricates compressed air. The GFC30015LF1WT is the size 300 unit with 1/2 in NPT ports, the fine 5 um (W) filter element, a differential-pressure drain on the bowl (polycarbonate on this size) and the low-pressure (L) type regulator, supplied with an embedded square gauge read in MPa.
This is a genuine AirTAC part, not a copy or substitute. The G series is offered in sizes 200, 300, 400 and 600, with automatic, manual or differential-pressure drains, 40 um or 5 um elements, several gauge and thread options, and a maximum working pressure of 1.0 MPa (145 psi) at -5 to 70 C (non-freezing). Flow and other datasheet figures are confirmed on request.
| Model | AirTAC GFC300-15 Combination Unit (GFC30015LF1WT) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-15 filter regulator and GL300-15 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/2" · 5 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-15 |
| Build order | Filter regulator first, lubricator last |
Conditioning the supply to end-of-arm grippers and vacuum ejectors on a robot cell, where the 5 um element helps protect small valves and the lubricator serves the actuated tooling.
Providing filtered, regulated and lubricated air to dispensing and handling modules on laboratory automation benches, with the embedded MPa gauge giving a local set-point readout.
Supplying doffing and yarn-threading cylinders on textile machinery through a 1/2 in NPT drop, with finer 5 um filtration ahead of sensitive control valves.
This code is identical to the standard GFC30015LF1 except for the W suffix, which selects the 5 um element instead of the 40 um standard - the right choice where finer dirt and condensate carry-over control matter. The 300 size gives 1/2 in NPT ports; step to 400 or 600 for larger demand. Drain is differential-pressure as coded, with automatic (A) or manual (M) selectable. Regulation with the differential-pressure drain covers 0.15-0.9 MPa (20-130 psi), and the L suffix selects the low-pressure type. The F1 suffix fits the embedded square gauge with an MPa scale.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue options you can order by changing the trailing code letter. AirTAC publishes flow as curves rather than one rated number, so send us your flow demand and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-15 filter regulator on its own.
We do not quote a rated flow figure because AirTAC publishes G-series flow as curves, not a single rating. Share your required flow and working pressure and we will confirm the right size from the datasheet on request.
The W code selects a 5 um element versus the 40 um standard. Choose W where downstream valves, cylinders or process work need finer particulate control; keep the standard grade for general actuation air.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.