
The AirTAC GFC300-15 Combination Unit (GFC30015MC1WTK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1/2" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GFC30015MC1WTK is a two-unit air preparation set: a 300-size filter regulator plus a separate lubricator, giving filtration, regulation and oil-mist lubrication from one 1/2 in NPT connection. The W suffix specifies the 5 um fine filter element, and the K suffix means a reverse (check) valve is fitted to help hold downstream pressure during supply dips. This configuration has a manual drain and an external round gauge scaled in MPa. It runs on compressed air only, up to 1.0 MPa (145 psi) and -5 to 70 C, and the manual-drain regulator adjusts from 0.05 to 0.9 MPa (7-130 psi). Bowls on the 300 size are polycarbonate.
This is a genuine AirTAC part in the G-series 300 size. The family spans 200, 300, 400 and 600 sizes with 1/8 to 1 in ports, G (BSPP) and NPT thread options, and automatic or differential-pressure drains as alternatives. Flow is published as curves rather than a single rating, so ask us to confirm sizing and the datasheet for your application.
| Model | AirTAC GFC300-15 Combination Unit (GFC30015MC1WTK) |
|---|---|
| Series | GFC300 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC300 | G-series two-unit set, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR300-15 filter regulator and GL300-15 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC300 · PT1/2" · 5 µm |
|---|---|
| One size down | GFC200 |
| One size up | GFC400 |
| Three-unit equivalent | GC300-15 |
| Build order | Filter regulator first, lubricator last |
Supplying 5 um filtered, regulated, lubricated air to the grippers and clamps on a robot end-effector, with the fitted check valve helping the grip stay charged if shop supply dips mid-cycle.
Conditioning the supply to tool-change cylinders and air-powered spindles on a CNC machining cell, where fine filtration protects pilot valves and the lubricator services the air motor.
Filtering, regulating and lubricating air on a workshop brake-test rig for commercial trailers, with the check valve holding the regulated test pressure while the supply side is load-checked.
This is the most fully optioned 300-size, 1/2 in NPT two-unit set in the range: 5 um fine filtration (W), a fitted reverse (check) valve (K), manual drain and an MPa round gauge. Pick it when you need both finer particle control and downstream pressure retention; drop the W for general duty or the K if you do not need pressure retention. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow appears only as curves, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR300-15 filter regulator on its own.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not state one number. Send your line pressure and air consumption and we will confirm the right size and provide the datasheet on request.
W upgrades the filter element from the standard 40 um to 5 um for finer particle removal. K fits a reverse (check) valve that helps hold downstream pressure if the supply drops. The base decode stays the same: two-unit filter regulator plus lubricator, 1/2 in NPT ports, manual drain and an MPa round gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.