
The AirTAC GFC400-10 Combination Unit (GFC40010AC1TK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC series combines a filter regulator and a lubricator in a two-piece set covering filtration, pressure regulation and oil-mist lubrication. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The trailing K fits a reverse (check) valve on the regulator section, which helps hold the regulated downstream pressure if upstream supply dips. The regulator adjusts across 0.15-0.9 MPa (20-130 psi); the set runs on compressed air from -5 to 70 C (non-freezing) at up to 1.0 MPa (145 psi) inlet, with polycarbonate bowls.
This is a genuine AirTAC part. The G series spans sizes 200 to 600 with ports from 1/8 in to 1 in, G (BSPP) and NPT thread variants, manual or differential drain options, a 5 um element option and gauge choices, so the configuration can be tailored to the line. Flow is published as curves rather than a single rating; ask us to confirm the datasheet figures and sizing for your application. Order code GFC40010AC1TK has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GFC400-10 Combination Unit (GFC40010AC1TK) |
|---|---|
| Series | GFC400 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC400 | G-series two-unit set, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-10 filter regulator and GL400-10 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC400 · PT3/8" · 40 µm |
|---|---|
| One size down | GFC300 |
| One size up | GFC600 |
| Three-unit equivalent | GC400-10 |
| Build order | Filter regulator first, lubricator last |
Well suited to fixture panels where clamps must stay closed: if the shop air main dips mid-cycle, the fitted check valve holds the regulated downstream pressure on the clamp circuit.
Supplies regulated, lubricated air to air-bellow press tooling and work-hold cushions, with the gauge confirming set pressure and the automatic drain keeping condensate out of the bellows air.
A tidy point-of-use set for a furniture shop's nailing and sanding benches: filtered, regulated and lubricated air at the bench, with the check valve stopping back-flow when a neighbouring machine vents.
Size 400 with 3/8 in NPT ports is the mid-large step of the G series. The automatic drain (A) clears the filter bowl unattended; differential-pressure and manual (M) drains are alternatives. The element is the standard 40 um grade (W orders 5 um), and the external round gauge reads MPa - square gauges and psi or bar scales are options. The trailing K fits the reverse (check) valve; order GFC40010AC1 without it if you do not need pressure holding. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue options.
Flow is published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-10 filter regulator on its own.
Yes - on request. AirTAC publishes flow for this series as curves rather than a single rated number, so we confirm the figures from the datasheet against your line pressure and consumption before you order.
K means a reverse (check) valve is fitted on the regulator section, holding the downstream setting if upstream supply pressure falls. The same set is available without it as GFC40010AC1 if you do not need the holding function.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.