
The AirTAC GFC400-10 Combination Unit (GFC40010AF1WT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
GFC40010AF1WT is a two-unit AirTAC G-series air-treatment set: a filter-regulator paired with a lubricator, so one purchase filters water and particulate from the compressed air, holds a steady downstream pressure and adds oil mist for cylinders and air tools. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Maximum working pressure is 1.0 MPa (145 psi); working temperature is -5 to 70 C, non-freezing. The bowls on the 400 size are polycarbonate.
This is a genuine AirTAC part. The G-series comes in 200, 300, 400 and 600 sizes with ports from 1/8 to 1 inch, with manual, automatic or differential-pressure drains, 40 um or 5 um elements, round or square gauges in MPa, psi or bar scales, and three thread types (NPT on this code). Flow is published as curves rather than a single rating, so ask us to confirm sizing figures from the datasheet for your application.
| Model | AirTAC GFC400-10 Combination Unit (GFC40010AF1WT) |
|---|---|
| Series | GFC400 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC400 | G-series two-unit set, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-10 filter regulator and GL400-10 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC400 · PT3/8" · 5 µm |
|---|---|
| One size down | GFC300 |
| One size up | GFC600 |
| Three-unit equivalent | GC400-10 |
| Build order | Filter regulator first, lubricator last |
Feeds spray guns on a refinishing line: water and dirt are stripped out, pressure is set for the gun, and oil mist keeps the trigger valve and needle packing working smoothly. The 5 um element suits finishing work where the standard 40 um grade is not fine enough.
Supplies the cylinders and grippers on a packaging-line case sealer. The regulator holds a constant setting as boxes pass, the automatic drain keeps the bowl clear on a line that runs unattended, and the lubricator mists the actuator seals.
Conditions the air feeding a pick-and-place robot's gripper circuit, where clean, regulated and lubricated supply keeps cycle-to-cycle grip force and cylinder life predictable.
Step between the 200, 300, 400 and 600 sizes to match the port and air demand of your line; 400 with a 3/8 inch port suits mid-size supply runs. The automatic drain coded here suits points nobody walks past; manual drain suits attended stations, and the differential-pressure default signals service by a visible pressure drop. The 5 um (W) element is the choice for finer work such as finishing and instrument-air duty; the standard 40 um element covers general supply. The square MPa gauge is fitted as coded, and round gauges in psi or bar scales can be ordered instead, as can G (BSPP) or NPT threads. G-series flow is published as curves, not a single rating, so send us your flow requirement and we will confirm the correct size against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-10 filter regulator on its own.
AirTAC publishes G-series flow as performance curves rather than one rated figure, so there is no single number we can quote honestly. Tell us your line pressure and required flow and we will confirm sizing against the datasheet on request before you order.
The coded A drain empties the filter bowl automatically as condensate collects, which suits unattended lines or rarely visited corners of the plant. Manual drain needs someone to open it; the differential-pressure default signals service by a visible pressure drop. All three drain types can be ordered across the GFC range.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.