
The AirTAC GFC400-10 Combination Unit (GFC40010ALC1T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/8" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
GFC40010ALC1T is a two-unit AirTAC G-series air-treatment set: a filter-regulator plus a lubricator, so it removes water and particulate, regulates downstream pressure and adds oil mist in one purchase. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Maximum working pressure is 1.0 MPa (145 psi); working temperature is -5 to 70 C, non-freezing. The 400-size bowls are polycarbonate.
This is a genuine AirTAC part. The G-series comes in 200, 300, 400 and 600 sizes with 1/8 to 1 inch ports, manual, automatic or differential-pressure drains, 40 um or 5 um elements, standard or low-pressure regulator types, round or square gauges in MPa, psi or bar scales, and three thread types (NPT on this code). With the automatic drain fitted, the standard regulator adjust range is 0.15-0.9 MPa (20-130 psi); confirm your exact setpoint requirement with us and we will check the datasheet on request.
| Model | AirTAC GFC400-10 Combination Unit (GFC40010ALC1T) |
|---|---|
| Series | GFC400 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC400 | G-series two-unit set, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-10 filter regulator and GL400-10 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC400 · PT3/8" · 40 µm |
|---|---|
| One size down | GFC300 |
| One size up | GFC600 |
| Three-unit equivalent | GC400-10 |
| Build order | Filter regulator first, lubricator last |
Conditions the air feeding the folding and tucking cylinders on a carton-former, with the automatic drain handling condensate on a line that runs through multiple shifts without an operator at the set.
Filters, regulates and lubricates the supply to toggle clamps on a fabrication fixture, holding a consistent clamp pressure from one weld cycle to the next.
Serves the cylinder circuits on textile weaving machinery, where a steady regulated supply and oil mist to the actuators keep the mechanisms running through long production runs.
Choose between the 200, 300, 400 and 600 sizes on port and air demand; this 400 with a 3/8 inch port serves mid-size supply runs. Pick the regulator type deliberately: this L code is the low-pressure type, while the blank code is the standard version. The automatic drain here suits unattended points; manual and differential-pressure drains are the alternatives. The standard 40 um element is coded; add W for the 5 um option. The round MPa gauge is ordered as coded; the embedded square gauge, and psi or bar scales, are the other gauge choices. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G-series flow is published as curves, not a single rating, so send us your flow requirement and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-10 filter regulator on its own.
AirTAC publishes G-series flow as performance curves rather than a single rated figure, so we do not quote one number. Give us your line pressure and required flow and we will confirm the sizing against the datasheet on request before you order.
L codes the low-pressure type of the GFC set, as opposed to the blank standard type. It is the version to specify where the working setting sits at the low end of the adjust range. Send us your setpoint and we will confirm the right version and its adjust range from the datasheet.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.