
The AirTAC GFC600-20 Combination Unit (GFC60020AC1WTK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/4" ports, a 5 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC series is a two-unit F.R.L. set: a filter-regulator in one body plus a separate lubricator, so the air is filtered, regulated and then oil-mist lubricated in one supply pass. This 600-size unit is specified for 3/4 in NPT ports, carries an automatic drain on the filter bowl, a 5 um filter element for finer water and particulate removal, an external round pressure gauge scaled in MPa, and a reverse (check) valve fitted to hold downstream pressure.
This is a genuine AirTAC part. The G series is offered in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in and three thread types (NPT on this code); at 600 size the bowls are aluminium alloy. Maximum working pressure is 1.0 MPa (145 psi), the regulator set range with automatic drain is 0.15-0.9 MPa (20-130 psi), and the temperature range is -5 to 70 C. Flow is published as curves rather than a single rated figure, so ask us to confirm datasheet figures on request. Order code GFC60020AC1WTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GFC600-20 Combination Unit (GFC60020AC1WTK) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-20 filter regulator and GL600-20 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-20 |
| Build order | Filter regulator first, lubricator last |
Feeds filtered, regulated and lubricated air to paint-line spray guns and air motors, where the 5 um element helps keep water and fine particulate out of the finish.
Serves the cylinder and gripper circuits of a bottling or filling line, with the automatic drain and check valve keeping the drop free of condensate and backflow.
Conditions the 3/4 in main air branch feeding a machining center's tool-clamp and pallet-change circuits, with oil mist for the downstream valves and actuators.
At 600 size with a 3/4 in port you are at the top of the G range, so this set suits the higher-flow branches of a compressed-air network; step down to 400 or 300 only if your line is smaller. The 5 um W element is the choice where finer filtration matters; drop to the standard 40 um element if it does not. The automatic drain discharges condensate without operator attention, the MPa-scaled round gauge gives an external pressure readout, and the fitted check valve holds downstream pressure. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are orderable options.
Flow for the G series is published as curves, not a single rated number, so please ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-20 filter regulator on its own.
AirTAC publishes flow for the G series as curves, not as a single rated figure, so we do not quote one number. Send us your line pressure and expected demand and we will confirm the flow figures from the datasheet on request before you order.
K is the reverse-valve position: a reverse (check) valve is fitted, which prevents backflow and helps hold downstream pressure when the upstream supply drops. GFC sets without the K are supplied without it.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.