
The AirTAC GFC600-20 Combination Unit (GFC60020AF1T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/4" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC series is a two-unit F.R.L. set: a filter-regulator in one body plus a separate lubricator, so compressed air is filtered, regulated and oil-mist lubricated at one conditioning point. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
This is a genuine AirTAC part. The G series is offered in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in and three thread types (NPT on this code); at 600 size the bowls are aluminium alloy. Maximum working pressure is 1.0 MPa (145 psi), the regulator set range with automatic drain is 0.15-0.9 MPa (20-130 psi), and the temperature range is -5 to 70 C. Flow is published as curves rather than a single rated figure, so ask us to confirm datasheet figures on request. Order code GFC60020AF1T has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GFC600-20 Combination Unit (GFC60020AF1T) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-20 filter regulator and GL600-20 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-20 |
| Build order | Filter regulator first, lubricator last |
Conditions the 3/4 in header feeding pneumatic knife-gate and butterfly actuators at a treatment plant, with regulated pressure shown on the embedded gauge.
Supplies the shop-air drop where technicians run wrenches, chisels and test rigs, with lubricator mist protecting hired and owned air tools.
Feeds filtered, regulated air to the actuated valves and purge points of a pilot-plant reactor skid, with the automatic drain handling compressor condensate.
Select the 600 size with 3/4 in NPT ports for main headers and multi-machine branches; step down to 400/300/200 for individual machines. The standard 40 um element covers general plant air; a W variant gives 5 um filtration where finer removal is needed. The automatic drain keeps the bowl clear without manual draining, and the embedded square MPa gauge keeps the set compact; external round gauges in MPa, psi or bar scales are available on other variants. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are orderable options.
Flow for the G series is published as curves, not a single rated number, so please ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-20 filter regulator on its own.
AirTAC publishes flow for the G series as curves, not as one rated figure, so we do not quote a single number. Share your application details and we will confirm the flow figures from the datasheet on request before you order.
F is the gauge position specifying the embedded square pressure gauge, and 1 sets its scale to MPa. Other variants of this set use an external round gauge, available with MPa, psi or bar scales.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.