
The AirTAC GFC600-20 Combination Unit (GFC60020F1TK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/4" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC60020F1TK is a two-unit treatment set - filter-regulator body plus separate lubricator - with the K suffix meaning a reverse (check) valve is fitted, so downstream pressure is held if the upstream supply drops. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Regulation range is 0.15-0.9 MPa (20-130 psi) with this drain type, max working pressure is 1.0 MPa (145 psi), and it runs on compressed air from -5 to 70 C (non-freezing). The 600-size bowls are aluminium alloy.
This is a genuine AirTAC part from the G-series, offered in sizes 200 to 600 with ports from 1/8 in to 1 in and options including automatic or manual drains, a 5 um W element and alternate gauge styles. Flow is published as curves rather than a single rating, so we confirm the datasheet and flow figures for your application on request.
| Model | AirTAC GFC600-20 Combination Unit (GFC60020F1TK) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-20 filter regulator and GL600-20 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-20 |
| Build order | Filter regulator first, lubricator last |
On a welding or machining fixture where clamps must stay closed if the plant air fails, the fitted check valve holds the regulated downstream pressure while the set keeps the supply filtered, set and lubricated.
On a bench used to function-test air valves and cylinders, the filter-regulator holds a steady, repeatable test pressure and the check valve prevents back-feeding from the device under test into the supply.
Feeding grippers and vacuum-assist actuators on a robot cell, the unit cleans and regulates the air, the check valve holds position on a momentary supply dip, and the lubricator services the actuator seals.
The K suffix is the key decision here: fit this version where a supply failure must not dump the regulated downstream pressure, such as a clamping circuit that has to hold. Otherwise choose by port and demand - 600 with 3/4 in NPT is the largest G-series step, with 400 and 300 below it. Drain options are differential-pressure (as fitted), automatic (A) or manual (M). The 40 um element suits general plant air; the W suffix gives 5 um. The embedded square gauge reads in MPa, with round and bar-scale variants in the family. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are order options. Flow is published as curves, not a single rating, so ask us to confirm sizing before ordering.
Quick checklist
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-20 filter regulator on its own.
There is no single rated flow figure we can quote: AirTAC publishes G-series flow as performance curves against pressure. Share your operating pressure and air consumption and we will confirm the datasheet and flow curves for this exact model on request so you can size it properly.
The K suffix means a reverse (check) valve is fitted, so the unit holds downstream pressure if the upstream supply is lost - useful for clamping or holding circuits. Everything else decodes the same as GFC60020F1: 600 size, 3/4 in NPT port, 40 um element, differential-pressure drain and an embedded square MPa gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.