
The AirTAC GFC600-20 Combination Unit (GFC60020F1WTK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/4" ports, a 5 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC60020F1WTK is a two-unit air preparation set that pairs a filter regulator with a lubricator, so one assembly cleans the air, holds a set downstream pressure and adds oil mist for downstream tools. This 600-size unit has 3/4 in NPT ports, a 5 um filter element for finer particulate removal, a differential-pressure drain on the bowl, an embedded square pressure gauge reading in MPa, and a built-in check (reverse) valve that stops backflow through the set. Maximum working pressure is 1.0 MPa (145 psi) and the regulator adjustment range is 0.15-0.9 MPa (20-130 psi) with this drain type.
This is a genuine AirTAC part. The G series runs from size 200 to 600 with ports from 1/8 in to 1 in, filter grades of 40 um (standard) or 5 um (W), differential-pressure, automatic or manual drains, gauge scales in MPa, psi or bar, and three thread types (NPT on this code). Flow is published as curves rather than a single rating, so we confirm the datasheet figures for your application on request.
| Model | AirTAC GFC600-20 Combination Unit (GFC60020F1WTK) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-20 filter regulator and GL600-20 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-20 |
| Build order | Filter regulator first, lubricator last |
Feeds filtered, pressure-regulated and lubricated air to the tool-changer and clamping circuits of a CNC machining centre, with the 5 um element protecting tight-tolerance valves on a 3/4 in main.
Prepares the air feeding pneumatic stoppers and pushers along a bottling conveyor, keeping the regulator set point steady while the lubricator mists the actuators that cycle all shift.
Sits at the drop of a 3/4 in assembly-plant ring main, conditioning air for impact wrenches and nut runners, with the check valve holding pressure if supply upstream dips.
Start with the port step: the 600 size carries 3/4 in NPT ports, one step up from the 400 size, so step up only if your line genuinely needs the larger connection and flow capability. This version is pre-set with the 5 um element - choose it over the standard 40 um where downstream valves and cylinders need finer air; the drain here is differential-pressure, while automatic (A) and manual (M) versions exist. The embedded square gauge reads MPa; psi (2) and bar (3) scales are catalogue options, and the check valve (K) is what the trailing K adds. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rated figure, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-20 filter regulator on its own.
AirTAC publishes flow for the G series as curves across a pressure range, not as a single rated number, so we do not quote one here. Tell us your working pressure and required air consumption and we will confirm the sizing from the datasheet on request.
W is the 5 um filter element instead of the standard 40 um element, and K means a reverse (check) valve is fitted to prevent backflow through the set. Both are decodable choices: drop the W for the standard grade and the K if you do not need the check valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.