
The AirTAC GFC600-20 Combination Unit (GFC60020F3T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/4" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC60020F3T is a two-unit air preparation set combining a filter regulator and a lubricator in one assembly: the air is filtered and held at a set downstream pressure, then oil mist is added for the tools and cylinders downstream. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Maximum working pressure is 1.0 MPa (145 psi) and the regulator adjustment range is 0.15-0.9 MPa (20-130 psi) with this drain type.
This is a genuine AirTAC part. The G series spans sizes 200 to 600 with ports from 1/8 in to 1 in, 40 um or 5 um filter grades, differential-pressure, automatic or manual drains, gauge scales in MPa, psi or bar, and three thread types (NPT on this code). Because flow is published as curves rather than a single rating, we confirm the datasheet figures for your application on request.
| Model | AirTAC GFC600-20 Combination Unit (GFC60020F3T) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-20 filter regulator and GL600-20 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-20 |
| Build order | Filter regulator first, lubricator last |
Conditions the supply to a carton-forming and sealing machine, filtering the plant air, holding a stable regulator set point and misting the cylinders that run the sealing heads.
Prepares air for quarter-turn pneumatic actuators on a water-treatment valve skid, with the 40 um element and regulator protecting the positioner and solenoid valves.
Feeds lubricated, regulated air to the pneumatic jets and guides on a weaving line, sized at 3/4 in for the machine's main inlet.
Size against flow: the 600 size gives 3/4 in NPT ports, so choose it over the 400 when the main line and air demand call for the larger connection. This version uses the standard 40 um element, which suits general plant air; switch to the W version for a 5 um element where finer filtration is needed. The drain is differential-pressure, with automatic (A) and manual (M) alternatives in the catalogue. The embedded square gauge reads in bar; MPa (1) and psi (2) scales are orderable alternatives, and the K suffix adds a check valve if you want one. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating, so ask us to confirm sizing against your flow and pressure data before ordering.
Quick checklist
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-20 filter regulator on its own.
AirTAC publishes flow for this series as performance curves across the pressure range rather than one rated figure, so we do not state a number. Share your working pressure and consumption and we will confirm the datasheet figures and sizing on request.
The F3 suffix decodes to the embedded square gauge with a bar scale; F1 is the same square gauge in MPa and F2 in psi, all catalogue options. There is also an external round gauge option if you prefer that style.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.