verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC600 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC600-20 Combination Unit (GFC60020MC1WT)

The AirTAC GFC600-20 Combination Unit (GFC60020MC1WT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/4" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT3/4"
  • Regulating range0.05 - 0.9 MPa (7 - 130 psi)
  • Filtering grade5 µm
  • DrainManual drain
  • Bowl materialAluminium alloy
  • Pressure gaugeFitted
  • ThreadNPT
$197.01 $204.51Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC600-20 drain, gauge and thread option on one page All GFC600-20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC600-20 Combination Unit (GFC60020MC1WT)

The GFC is AirTAC's two-unit air preparation set: a filter regulator paired with a lubricator, so one order covers filtration, pressure regulation and oil-mist lubrication. This 600-size unit carries NPT3/4 ports, a manual drain on the filter bowl, a fine 5 um filter element, and a round external gauge scaled in MPa. With the 600 frame, the filter-section bowl is aluminium alloy.

This is a genuine AirTAC part, rated for compressed air at up to 1.0 MPa (145 psi) inlet and -5 to 70 C (non-freezing). With the manual drain fitted, the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi). The G-series is also offered in 200, 300 and 400 sizes with a choice of drain types, 40 um or 5 um elements, and three thread types (NPT on this code). Flow figures are published as curves rather than a single rating, so we confirm the datasheet and sizing on request. Order code GFC60020MC1WT has NPT ports (the T in the code) for North American pipe fittings.

AirTAC GFC600-20 Combination Unit (GFC60020MC1WT) Technical Specifications

ModelAirTAC GFC600-20 Combination Unit (GFC60020MC1WT)
SeriesGFC600 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT3/4" (NPT thread)
Filtering grade5 µm
Regulating range0.05 - 0.9 MPa (7 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeManual drain
Bowl materialAluminium alloy
Pressure gaugeFitted — round, MPa scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC600-20 Combination Unit (GFC60020MC1WT)

GFC600G-series two-unit set, 600 body — sets the port range.
20Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1".
MDrain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
CGauge shape: Round. C is round, F is square.
1Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-20 filter regulator and GL600-20 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC600 · PT3/4" · 5 µm
One size downGFC400
Three-unit equivalentGC600-20
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC600-20 Combination Unit (GFC60020MC1WT) Is Used

air

Automotive paint booth air drops

At a spray-booth drop, the set filters fine moisture and particulate out of the air, sets a stable atomising pressure, and meters oil mist to the spray gun's air motor. The 5 um element and NPT3/4 port suit a dedicated booth supply line.

factory

Pneumatic clamping on a machine-tool fixture

On a machining centre's hydraulic-free clamping circuit, the unit conditions the shop air, holds the regulated clamp pressure via the gauge, and lubricates the swing-cylinder actuator over thousands of cycles per shift.

conveyor_belt

Packaging line carton-sealer cylinders

Carton taping and case-sealing machines run air cylinders continuously; this two-unit set conditions the 3/4-inch header supply, keeps the regulator set for consistent flap folding, and keeps oil mist in the cylinders.

Is the AirTAC GFC600-20 Combination Unit (GFC60020MC1WT) the Right Set?

The 600 size with its 3/4-inch port is the natural step when your line runs larger cylinders or higher air demand than a 300 or 400 unit can carry; compare sizes against the flow curves before you fix the frame. The manual drain here means someone bleeds the bowl on a routine - choose the automatic drain instead for inaccessible installs, or the differential-pressure default for balanced day-to-day service. The 5 um element in this code is the finer option; the 40 um standard element suits coarser general plant air. The round MPa gauge is external and easy to read; square-gauge and psi/bar scale versions exist in the catalogue. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating - ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT3/4" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.05 - 0.9 MPa (7 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-20 filter regulator on its own.

AirTAC GFC600-20 Combination Unit (GFC60020MC1WT) FAQ

AirTAC publishes flow for the G series as performance curves, not as a single rated number, so there is no one figure we can honestly quote. Tell us your working pressure and air demand and we will confirm the correct size from the datasheet on request.

The M in the code specifies a manual drain: the bowl is emptied by hand on a routine. AirTAC also offers the automatic drain (A) and the differential-pressure drain (the default) on the same 600 frame, so you can pick the drain style that matches how the unit is accessed in service.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC600-20 Combination Unit (GFC60020MC1WT)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GFC60020MC1WT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.