
The AirTAC GFC600-20 Combination Unit (GFC60020MC1WTK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT3/4" ports, a 5 µm element, a manual drain and regulation over 0.05 - 0.9 MPa (7 - 130 psi).
The GFC is AirTAC's two-unit air preparation set: a filter regulator plus a lubricator, delivering filtration, regulation and oil-mist lubrication together. This 600-size unit has NPT3/4 ports, a manual drain on the filter bowl, a fine 5 um filter element, a round external gauge in MPa, and a reverse (check) valve fitted as indicated by the trailing K. The 600 frame uses an aluminium alloy bowl on the filter section.
This is a genuine AirTAC part for compressed air, rated to 1.0 MPa (145 psi) inlet and -5 to 70 C (non-freezing); with the manual drain, the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi). The same set exists in 200, 300 and 400 sizes and with 40 um elements, automatic or differential drains, square gauges and G or NPT threads. Flow is published as curves, so we confirm the datasheet and sizing on request. Order code GFC60020MC1WTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GFC600-20 Combination Unit (GFC60020MC1WTK) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-20 filter regulator and GL600-20 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-20 |
| Build order | Filter regulator first, lubricator last |
A pick-and-place robot's gripper circuit benefits from conditioned, lubricated air and from the check valve fitted here, which keeps the regulated supply stable at the gripper manifold during brief upstream interruptions.
On a bottling line where pneumatic butterfly and diaphragm valves stroke repeatedly, this set filters and regulates the 3/4-inch branch supply and feeds oil mist to the actuators, with the check valve holding line pressure at the valve block.
Plant air feeding positioner and damper actuators needs clean, dry, regulated, lubricated supply; the 600 size carries the branch demand and the fitted check valve prevents backflow through the preparation set.
Choose the K suffix when you want the reverse (check) valve already fitted - useful where you want downstream pressure held if supply is interrupted. Size-wise, this is the 600 frame with a 3/4-inch NPT port; step down to 300 or 400 if the flow curves allow, and compare sizes on the curves rather than a single rating. The manual drain suits attended installations; pick automatic (A) where bleeding by hand is impractical. This code carries the fine 5 um element - the 40 um standard element is the choice for general plant air. The round MPa gauge is external and readable at a glance; square-gauge and psi/bar versions are catalogue options. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-20 filter regulator on its own.
There is no single rated flow figure to quote - AirTAC publishes the G series flow as curves. Send us your working pressure and consumption and we will confirm the sizing from the datasheet on request before you order.
K specifies that a reverse (check) valve is fitted in the unit, so downstream pressure is held against backflow. The same 600-size two-unit set is available without the check valve under the plain GFC60020MC1W code, and drain type, filter grade and gauge options can be reordered accordingly.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.