verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC600 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC600-25 Combination Unit (GFC60025AC3T)

The AirTAC GFC600-25 Combination Unit (GFC60025AC3T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT1"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade40 µm
  • DrainAutomatic drain
  • Bowl materialAluminium alloy
  • Pressure gaugeFitted
  • ThreadNPT
$210.71 $218.21Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC600-25 drain, gauge and thread option on one page All GFC600-25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC600-25 Combination Unit (GFC60025AC3T)

The AirTAC GFC series is a two-unit air preparation set that pairs a filter-regulator with a lubricator, so one assembly filters, regulates and oil-mist lubricates the compressed air. This version is the size 600 set with a 1 in. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. With automatic drain the regulator adjusts 0.15-0.9 MPa (20-130 psi), inlet pressure can reach 1.0 MPa (145 psi), and the working temperature is -5 to 70 C, non-freezing. At size 600 the filter-regulator bowl is aluminium alloy.

This is a genuine AirTAC part. GFC sets come in sizes 200, 300, 400 and 600 with ports from 1/8 in. to 1 in., selectable drains, 40 um or 5 um elements, and MPa, psi or bar gauge scales. Flow is published as curves rather than a single rating, so we confirm the datasheet figures for your application on request. Order code GFC60025AC3T has NPT ports (the T in the code) for North American pipe fittings.

AirTAC GFC600-25 Combination Unit (GFC60025AC3T) Technical Specifications

ModelAirTAC GFC600-25 Combination Unit (GFC60025AC3T)
SeriesGFC600 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT1" (NPT thread)
Filtering grade40 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeAutomatic drain
Bowl materialAluminium alloy
Pressure gaugeFitted — round, bar scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC600-25 Combination Unit (GFC60025AC3T)

GFC600G-series two-unit set, 600 body — sets the port range.
25Port size PT1". This body offers 20 = PT3/4", 25 = PT1".
ADrain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
CGauge shape: Round. C is round, F is square.
3Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC600 · PT1" · 40 µm
One size downGFC400
Three-unit equivalentGC600-25
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC600-25 Combination Unit (GFC60025AC3T) Is Used

factory

Injection moulding shop services

Prepares and lubricates air for core-pull and ejector circuits on injection moulding machines, with the bar gauge matching the metric instrumentation used on European-built presses.

valve

Water treatment valve actuators

Filters, regulates and oils the air supply to quarter-turn pneumatic valve actuators on a municipal water treatment train, where automatic draining suits a humid compressor room.

engineering

Steel service line clamping

Conditions the air feeding strip-clamping and table-rise cylinders at a steel service centre coil processing line, with the 40 um element protecting general-duty cylinder seals.

Is the AirTAC GFC600-25 Combination Unit (GFC60025AC3T) the Right Set?

Take this code when you want the big 1 in. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The automatic drain handles condensate unattended, and the 20-130 psi (0.15-0.9 MPa) regulation window with automatic drain covers most general machinery settings. If you need the finer 5 um element, a psi or MPa gauge, a different drain, or a G/NPT thread, those exist as adjacent GFC codes. Because flow appears only as curves, ask us to confirm sizing against your actual demand before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.

AirTAC GFC600-25 Combination Unit (GFC60025AC3T) FAQ

None that we can quote as a single number: AirTAC publishes G-series flow capacity as curves, not a rated figure. Give us your line pressure and air demand and we will confirm the datasheet figures on request, so the 1 in. port can be checked against your application before ordering.

A GFC set is two pieces: one combined filter-regulator body plus a separate lubricator, so it filters, regulates and lubricates in a more compact footprint. The GC series is three separate units - filter, regulator and lubricator - mounted in sequence. Both exist in size 600 with a 1 in. NPT port, and this code additionally selects the automatic drain, 40 um element and bar-scale round gauge.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC600-25 Combination Unit (GFC60025AC3T)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GFC60025AC3T and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.