AirTAC GL600-25 Lubricator (GL60025)
The AirTAC AirTAC GL600-25 Lubricator (GL60025) is a genuine G-series air lubricator. It meters an oil mist into the compressed-air line so cylinders, valves and air tools downstream stay lubricated, with PT1" ports and a aluminium alloy oil bowl. A lubricator does not filter or regulate — it goes last in the line, after the filter and the regulator.
- TypeAir lubricator
- Port sizePT1"
- Inlet pressure0.05 - 1.0 MPa
- Oil bowlAluminium alloy
- ThreadPT
- BracketMounting bracket included
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GL600-25 Lubricator (GL60025)
The AirTAC GL60025 is a G-series air lubricator for compressed air: it meters a fine oil mist into the line so downstream cylinders, valves and air tools stay lubricated. It performs no filtration and no pressure regulation - lubrication is its single function. This unit is size 600 with PT1 ports, the largest port in the G-series lubricator range, with an aluminium alloy bowl and a mounting bracket included. Maximum working pressure is 1.0 MPa (145 psi); operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The G-series lubricator range steps from size 200 to size 600 with ports from 1/8 in to 1 in, PT as the standard thread and G (BSPP) or NPT as catalogue options, and the bracket can be omitted with a J suffix. AirTAC publishes lubricator flow as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application on request.
AirTAC GL600-25 Lubricator (GL60025) Technical Specifications
| Model | AirTAC GL600-25 Lubricator (GL60025) |
|---|---|
| Series | GL600 air lubricator |
| Port size | PT1" (PT thread) |
| Oil bowl material | Aluminium alloy |
| Bracket | Mounting bracket included |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.05 - 1.0 MPa (7 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Function | Oil-mist lubrication only |
Specifications follow the official AirTAC G-series air-preparation data. A lubricator has no drain, no regulating mechanism, no gauge and no filter element, so none of those figures apply. Oil grade, bowl capacity, flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GL600-25 Lubricator (GL60025)
| GL600 | G-series air lubricator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Mounting bracket included. A bracket ships by default; J orders it without. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
The lubricator has the shortest code of the six G-series subfamilies — size, port, bracket, thread. There is no drain, pressure-type, gauge or filtering-grade position. Example: GL300-10JG is a 300 body, PT3/8", no bracket, G (BSPP) thread.
Size Class
- GL200PT1/8" - PT1/4"
- GL300PT1/4" - PT1/2"
- GL400PT3/8" - PT1/2"
- GL600PT3/4" - PT1"
A larger body carries a larger port and passes more air. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GL600 uses an aluminium-alloy oil bowl; the 200, 300 and 400 bodies use PC.
| This model | GL600 · PT1" |
|---|---|
| One size down | GL400 |
| Line order | Filter first, then regulator, lubricator last |
Where the AirTAC GL600-25 Lubricator (GL60025) Is Used
Foundry molding line
Sits on a 1 in plant-air header at a foundry, feeding lubricated air to the squeeze and draw cylinders of a molding line so the big-bore actuators run on oiled air.
Heavy-vehicle depot shop air
At a truck and bus depot, it lubricates the 1 in shop-air drop that feeds chassis impact guns, bead breakers and lifting bags across the heavy-vehicle bays.
Machining cell fixture clamps
Installed on the 1 in supply to a machining cell, it oils the air powering fixture clamps and swing cylinders around a CNC lathe without regulating the line pressure.
Is the AirTAC GL600-25 Lubricator (GL60025) the Right Lubricator?
The GL60025 is the top of the G-series lubricator range: a size 600 body with 1 in PT ports for the largest plant circuits, while GL60020 covers 3/4 in lines and the 200 to 400 bodies cover 1/8 in to 1/2 in. Thread is PT as standard, with G (BSPP) and NPT available as options, and the mounting bracket is included on this code. AirTAC publishes lubricator flow as curves, not a single rated number, so give us your line size and air demand and we will confirm sizing against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1" here)
- ✓ Downstream equipment actually needs oil
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
- ✓ Bowl material: PC, or aluminium on GL600
- ✓ Fit after the filter and regulator
Installation & Maintenance Notes
- check Fit last in the line: filter, then regulator, then lubricator.
- check Mount vertically, bowl down, following the airflow arrow.
- check Keep inlet pressure within 0.05 - 1.0 MPa.
- check Use only oil approved for pneumatic lubricators.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Check the oil level regularly; top up before it runs dry.
The aluminium-alloy bowl on the GL600 suits harsher environments than a PC bowl. The oil mist travels downstream, so if any branch of the line must stay oil-free, take that branch off before the lubricator. We will confirm the recommended oil grade from the factory datasheet on request.
AirTAC GL600-25 Lubricator (GL60025) FAQ
AirTAC publishes lubricator performance as flow curves across pressure and port size rather than a single rated figure, so we do not quote one number here. Share your line pressure and air demand and we will confirm the correct size from the datasheet on request.
Match the port to your piping: the GL60025 has 1 in PT ports for the largest circuits, while the GL60020 is the same size 600 body with 3/4 in ports. If your main is 3/4 in, the GL60020 is the fit; for 1 in headers, use the GL60025.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GL600-25 Lubricator (GL60025)
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.