
The AirTAC GFC600-25 Combination Unit (GFC60025AF1T) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC is a two-unit air-preparation set that combines a filter-regulator with a lubricator, so one assembly filters, regulates and oil-mists your compressed air. This GFC60025AF1T is the size 600 configuration with a 1 in. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. With automatic draining, accumulated condensate is expelled without anyone opening the drain, which suits unattended main-line installations.
This is a genuine AirTAC part. The G series runs from size 200 through 600, with 40 um standard or 5 um (W) filtration, differential-pressure, automatic or manual drains, gauge and thread options, and an optional mounting bracket. AirTAC publishes flow as curves rather than a single rated figure, so ask us and we will confirm the datasheet and flow figures for your application on request.
| Model | AirTAC GFC600-25 Combination Unit (GFC60025AF1T) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT1" · 40 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-25 |
| Build order | Filter regulator first, lubricator last |
Filters, regulates and lubricates the 1 in. main-air drop that feeds impact wrenches, clamps and air balancers along a vehicle trim and assembly line.
Prepares the air feeding cylinder-driven capping, filling and labelling stations on a beverage bottling line, with automatic condensate draining.
Point-of-entry preparation for a CNC machining cell's pneumatics, supplying pallet clamps, tool-change cylinders and chip conveyors from one set.
At size 600 with a 1 in. port this is the largest step in the G series; choose it when your main-air consumption is well beyond what a 400 (3/4 in.) or smaller unit serves, and step down a size if your line is lightly loaded. The automatic drain is already selected here; manual (M) and differential-pressure (blank) drains are alternative order codes. The 40 um element is the standard grade - order the W variant if you need 5 um. The embedded square gauge with MPa scale is included; an external round gauge and psi or bar scales are available as options.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue thread options you can order. A mounting bracket is optional. Flow is published as curves, not a single rating, so please ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.
AirTAC publishes flow for the G series as curves, not as a single rated number, so we do not quote one figure here. Tell us your application and we will confirm the datasheet and the relevant flow-curve data on request before you order.
The A in the code specifies an automatic drain, which expels condensate from the bowl without operator attention - useful for unattended main lines. Manual (M) and differential-pressure (no code) drains are available as separate order codes if you prefer a lower cost or a controlled drain routine.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.