verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC600 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC600-25 Combination Unit (GFC60025AF1TK)

The AirTAC GFC600-25 Combination Unit (GFC60025AF1TK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 40 µm element, a automatic drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT1"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade40 µm
  • DrainAutomatic drain
  • Bowl materialAluminium alloy
  • Pressure gaugeFitted
  • ThreadNPT
$225.64 $233.14Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC600-25 drain, gauge and thread option on one page All GFC600-25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC600-25 Combination Unit (GFC60025AF1TK)

The AirTAC GFC is a two-unit air-preparation set combining a filter-regulator with a lubricator, so one assembly filters, regulates and oil-mists compressed air. This GFC60025AF1TK is the size 600 configuration with a 1 in. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The check valve is the difference from the plain AF1 code: it is built into the unit to block reverse flow through the set.

This is a genuine AirTAC part. The G series spans sizes 200 to 600, with 40 um standard or 5 um (W) filtration, three drain types, gauge, thread and bracket options, and the K check-valve option on regulator-bearing units. AirTAC publishes flow as curves rather than a single rated figure, so ask us and we will confirm the datasheet and flow figures on request.

AirTAC GFC600-25 Combination Unit (GFC60025AF1TK) Technical Specifications

ModelAirTAC GFC600-25 Combination Unit (GFC60025AF1TK)
SeriesGFC600 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT1" (NPT thread)
Filtering grade40 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeAutomatic drain
Bowl materialAluminium alloy
Pressure gaugeFitted — square, MPa scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC600-25 Combination Unit (GFC60025AF1TK)

GFC600G-series two-unit set, 600 body — sets the port range.
25Port size PT1". This body offers 20 = PT3/4", 25 = PT1".
ADrain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
1Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC600 · PT1" · 40 µm
One size downGFC400
Three-unit equivalentGC600-25
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC600-25 Combination Unit (GFC60025AF1TK) Is Used

factory

Press-shop pneumatic supply

Prepares the 1 in. supply feeding pneumatic presses and clamping fixtures in a stamping shop, with the check valve guarding against reverse flow in the drop.

valve

Process valve actuation skid

Filters, regulates and lubricates air for quarter-turn actuator packages on a water-treatment valve skid, with automatic condensate draining.

conveyor_belt

Distribution-centre sorter supply

Main-air preparation for the pop-up wheels and diverters of a parcel-sort conveyor, where the check valve protects the regulated downstream circuit.

Is the AirTAC GFC600-25 Combination Unit (GFC60025AF1TK) the Right Set?

Size 600 with a 1 in. port is the top of the G series; pick it for heavily loaded main-air lines and step down to 400 (3/4 in.) or less where consumption is modest. This code carries the K option - a reverse/check valve - so choose it where backflow through the set must be prevented; omit K for the plain version. The automatic drain is built in; manual (M) and differential-pressure (blank) drains exist as other codes. The 40 um element is standard; the W code gives 5 um.

The embedded square gauge reads in MPa; an external round gauge and psi or bar scales are orderable options. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.

AirTAC GFC600-25 Combination Unit (GFC60025AF1TK) FAQ

AirTAC does not publish a single rated flow for this set - flow is given as curves. Send us your application details and we will confirm the datasheet and the flow-curve data on request so you can size it correctly before ordering.

K specifies that a reverse (check) valve is fitted to the unit, so air cannot flow back through the set. The same hardware without the check valve is ordered as GFC60025AF1; choose K only where your circuit needs that backflow protection.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC600-25 Combination Unit (GFC60025AF1TK)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GFC60025AF1TK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.