
The AirTAC GFC600-25 Combination Unit (GFC60025C3WT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 5 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC series pairs a filter regulator with a lubricator in one two-piece set: the supply is filtered, regulated, then enriched with oil mist to protect downstream cylinders and tools. GFC60025C3WT is the 600 size with 1 in. NPT ports, a differential-pressure drain, the fine 5 um (W) filter element and a round pressure gauge scaled in bar. On the 600 size the bowls are aluminium alloy; maximum working pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.15-0.9 MPa (20-130 psi), and the temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFC family runs from the 200 to the 600 size with ports from 1/8 in. to 1 in., and options include automatic, manual or differential-pressure drains, 40 um or 5 um filtration, MPa, psi or bar gauge scales, G (BSPP) or NPT thread versions and an optional mounting bracket. Flow is published as curves rather than a single rating, so we confirm the datasheet and sizing figures on request.
| Model | AirTAC GFC600-25 Combination Unit (GFC60025C3WT) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT1" · 5 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-25 |
| Build order | Filter regulator first, lubricator last |
Regulated, filtered and lubricated air for impact wrenches and air ratchets fed from a large workshop header, with the 5 um element guarding the tool air motors.
Air preparation for the clamp and hold-down cylinders on a folder-gluer, with oil mist protecting the actuators that cycle continuously along the machine.
Supply conditioning for the big diverter-gate and dust-valve actuators on a crushing and screening line, where a 1 in. port feeds heavy-duty cylinders.
The 600 size is the right step when 1 in. NPT ports are needed for the largest air demand in the GFC range. The W in this code selects the 5 um element instead of the standard 40 um element - choose it when the downstream cylinders and tools need finer protection from particulates. The differential-pressure drain sheds condensate during normal flow; automatic (A) and manual (M) drain codes are alternatives. This version carries a round bar-scale gauge; This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.
Flow for the G series is published as curves, not as a single rated figure, so we cannot quote one rated number. Tell us your line pressure and required consumption and we will confirm the correct size against the datasheet on request.
The standard 40 um element suits most cylinder and air-tool circuits. The W suffix selects a 5 um element for finer particulate removal where downstream equipment is more sensitive; it is an orderable option within the same GFC family.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.