verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GFC600 · Two-Unit Set (filter regulator + lubricator)

AirTAC GFC600-25 Combination Unit (GFC60025F1TK)

The AirTAC GFC600-25 Combination Unit (GFC60025F1TK) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeTwo-unit set (F.R. + L.)
  • Port sizePT1"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade40 µm
  • DrainDifferential-pressure drain
  • Bowl materialAluminium alloy
  • Pressure gaugeFitted
  • ThreadNPT
$211.94 $219.44Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GFC600-25 drain, gauge and thread option on one page All GFC600-25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GFC600-25 Combination Unit (GFC60025F1TK)

The AirTAC GFC series combines a filter regulator and a lubricator in one two-piece set: the supply is filtered, regulated and then oil-mist lubricated before reaching downstream cylinders and tools. GFC60025F1TK is the 600 size with 1 in. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The 600-size bowls are aluminium alloy; maximum working pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.15-0.9 MPa (20-130 psi), and the temperature range is -5 to 70 C (non-freezing).

This is a genuine AirTAC part. The GFC family spans 200, 300, 400 and 600 sizes with ports from 1/8 in. to 1 in., and options include automatic, manual or differential-pressure drains, 40 um or 5 um filtration, MPa, psi or bar gauge scales, the reverse (check) valve, G (BSPP) or NPT thread versions and an optional mounting bracket. Flow is published as curves rather than a single rating, so we confirm the datasheet and sizing figures on request.

AirTAC GFC600-25 Combination Unit (GFC60025F1TK) Technical Specifications

ModelAirTAC GFC600-25 Combination Unit (GFC60025F1TK)
SeriesGFC600 two-unit set
CompositionFilter regulator + lubricator (2 units)
Port sizePT1" (NPT thread)
Filtering grade40 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeDifferential-pressure drain
Bowl materialAluminium alloy
Pressure gaugeFitted — square, MPa scale
Reflux valveFitted (reverse flow permitted)

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GFC600-25 Combination Unit (GFC60025F1TK)

GFC600G-series two-unit set, 600 body — sets the port range.
25Port size PT1". This body offers 20 = PT3/4", 25 = PT1".
(blank)Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
1Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
KReverse-flow (reflux) valve fitted.

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.

Size Class & How It Differs From GC

  • GFC200PT1/8" - PT1/4"
  • GFC300PT1/4" - PT1/2"
  • GFC400PT3/8" - PT1/2"
  • GFC600PT3/4" - PT1"

A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.

This modelGFC600 · PT1" · 40 µm
One size downGFC400
Three-unit equivalentGC600-25
Build orderFilter regulator first, lubricator last

Where the AirTAC GFC600-25 Combination Unit (GFC60025F1TK) Is Used

build

Pneumatic riveting rig

Air preparation for a riveting and forming press, where the fitted check valve helps hold the regulated downstream pressure between strokes if the supply dips.

engineering

Waterworks valve actuation

Conditioned, lubricated air for double-acting actuators opening and closing large butterfly valves in a treatment plant, fed through 1 in. NPT ports.

air

Blast room air supply

Filtration, regulation and lubrication for the cylinder-operated meters and gates around a abrasive blasting installation, with the check valve guarding the regulated side.

Is the AirTAC GFC600-25 Combination Unit (GFC60025F1TK) the Right Set?

Select the 600 size when 1 in. NPT ports are needed for the heaviest air demand in the GFC range. The K suffix on this code fits a reverse (check) valve, the right choice where losing supply pressure must not immediately vent the downstream circuit - for example on clamping or pressing functions that need to hold their set condition. The differential-pressure drain clears condensate during normal flow; automatic (A) and manual (M) drain codes are alternatives. The standard 40 um element covers most cylinder and tool circuits, with the W suffix for 5 um filtration. The square gauge is scaled in MPa; psi or bar round-gauge versions exist, and the thread can be ordered as G (BSPP) or NPT. Flow is published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Two-unit (GFC) or three-unit (GC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter regulator first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the set above freezing (-5 to +70 °C, unfreeze).

The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.

AirTAC GFC600-25 Combination Unit (GFC60025F1TK) FAQ

Flow for the G series is published as curves, not as a single rated figure, so no one rated flow number can be quoted. Give us your line pressure and air demand and we will confirm the sizing against the datasheet on request.

K means a reverse (check) valve is fitted, so downstream pressure is held against backflow if the supply side drops. Without the K the set is identical in function: a 600-size filter regulator plus lubricator with 1 in. NPT ports, differential-pressure drain and 40 um filtration.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GFC600-25 Combination Unit (GFC60025F1TK)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GFC60025F1TK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.