
The AirTAC GFC600-25 Combination Unit (GFC60025F1WT) is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with PT1" ports, a 5 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GFC series is a two-unit compressed-air treatment set: a filter regulator paired with a separate lubricator, so one station removes water and particulate, sets downstream pressure and adds oil mist for air tools and cylinders. This GFC60025F1WT is built in size 600 with a 1 inch NPT port, a 5 um filter element, a differential-pressure drain and an embedded square gauge reading in MPa. Both bowls are aluminium alloy at size 600. Maximum inlet pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFC family is available in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, a choice of 40 um or 5 um filtration, differential-pressure, automatic or manual drains, MPa, psi or bar gauge scales, and G (BSPP) or NPT thread options. Flow is published as curves rather than a single rating, so we confirm the datasheet figures for your application on request.
| Model | AirTAC GFC600-25 Combination Unit (GFC60025F1WT) |
|---|---|
| Series | GFC600 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | PT1" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFC600 | G-series two-unit set, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR600-25 filter regulator and GL600-25 lubricator.
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC600 · PT1" · 5 µm |
|---|---|
| One size down | GFC400 |
| Three-unit equivalent | GC600-25 |
| Build order | Filter regulator first, lubricator last |
Mounted at a 1 inch drop from the plant ring main, the set feeds impact wrenches, clamps and air cylinders: the 5 um element strips water and scale from the main, the regulator holds steady tool pressure and the lubricator mists oil into the tool air supply.
On a high-speed filling line, diverter gates, pushers and capper cylinders all run off one prepared-air drop. This two-unit set keeps that drop filtered, regulated and lubricated so the line actuators seat and seal smoothly shift after shift.
A machining cell using pneumatic clamps and chip-blowing nozzles benefits from the fine 5 um grade: water carry-over that would spot finished parts or gum up small orifices is removed before the air reaches the fixtures and nozzles.
Size 600 with a 1 inch NPT port is the largest step in the GFC range; step down to 400, 300 or 200 if your line ports and demand are smaller. This unit carries the 5 um (W) element - choose the 40 um standard element where general plant-air protection is sufficient. With the default differential-pressure drain, the regulator setting range is 0.15-0.9 MPa (20-130 psi); automatic or manual drains are catalogue options. The embedded square gauge reads in MPa; psi or bar scales and an external round gauge can be ordered. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GFC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR600-25 filter regulator on its own.
AirTAC publishes flow for the G series as curves rather than a single rated number, so we do not quote a rated flow figure here. Send us your line pressure, port size and air demand and we will confirm the correct sizing from the datasheet on request.
Both filter, regulate and lubricate. In the GFC the filter and regulator share one body and the lubricator is a separate second piece, so the set takes less wall or manifold space. The GC keeps all three functions as three separate units. Drain type, filter grade and gauge scale are decodable choices in either family.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.